OleFarmBoy's latest activity
-
OOleFarmBoy reacted to arrow's post in the thread TYM wants to tip or roll over - need advise with
Good Post.
As Clover intimated, heavy lifts for a tractor can do more than meets the eye. Wheel bearings can be affected as well as steering... -
OOleFarmBoy reacted to Vinnnie's post in the thread TYM wants to tip or roll over - need advise with Good Post.
That's an awfully tiny tractor to be lifting that much !! For heavy lifting I have an 1800 Oliver with fel.
-
OOleFarmBoy reacted to Gord Baker's post in the thread TYM wants to tip or roll over - need advise with Good Post.
You need to have less weight on the FEL.
-
OOleFarmBoy reacted to CloverKnollFarms's post in the thread TYM wants to tip or roll over - need advise with Good Post.
Next post. TYM front bearings need replacing already. Yep
-
OOleFarmBoy reacted to RayIN's post in the thread TYM wants to tip or roll over - need advise with Good Post.
Your CUT only weighs 3,020# wo/FEL or cab. That 1,650# pallet weighs more than half the tractor. The length of bucket + forks puts the...
-
OOleFarmBoy reacted to bcp's post in the thread TYM wants to tip or roll over - need advise with Good Post.
Several loader manuals recommend a 3pt counterweight in pounds, that works out to about 2/3 to 3/4 of the lift capacity. Bruce
-
OOleFarmBoy reacted to CalG's post in the thread TYM wants to tip or roll over - need advise with Good Post.
Just having a look at "Tractor Data", that loader is good for a ton of lift at the pin. About 2/3rds of that in a bucket. Using...
-
OOleFarmBoy reacted to 2manyrocks's post in the thread TYM wants to tip or roll over - need advise with Good Post.
I suspect just having a bush hog on the rear 3pt will exert quite a bit of counter leverage due to its length. Not having anything on...
-
OOleFarmBoy reacted to dodge man's post in the thread TYM wants to tip or roll over - need advise with Good Post.
Tractor Time With Tim did a good video of the results of loading tires. They had scales on the front and back axle and forks on the...
-
OOleFarmBoy reacted to SPYDERLK's post in the thread TYM wants to tip or roll over - need advise with Good Post.
Put several bags of the mulch on the bushog and youll be good to go. Filled tires (ballast) is good, but counterweight, carried low...
-
OOleFarmBoy reacted to part-time-Farmer-NC's post in the thread TYM wants to tip or roll over - need advise with Good Post.
In a pinch you could try loading some bags of feed/concrete anything heavy on the bushhog. Matter of fact you can add some of that...
-
OOleFarmBoy reacted to part-time-Farmer-NC's post in the thread TYM wants to tip or roll over - need advise with Good Post.
Probably not yOu can either make a ballast box or buy something heavier..
-
OOleFarmBoy reacted to welderskelter's post in the thread No, I am NOT going to try to take down a dead 100' Hickory tree! with Good Post.
It does have a lot of small branches. This tells me it hasent been dead for too long. If the smallest limbs were inch and a half I would...
-
OOleFarmBoy reacted to Blue Mule's post in the thread No, I am NOT going to try to take down a dead 100' Hickory tree! with Good Post.
That tree doesn't look like a 100 footer. And just from the crude pics I would saw those branches off one at a time. The advantage of...
-
OOleFarmBoy reacted to PentonKTM's post in the thread No, I am NOT going to try to take down a dead 100' Hickory tree! with Good Post.
Maybe get a quote to just drop it and let it lay. I've found most of the cost of tree removal is the cutting up, chipping and stump...