Omnipotent's latest activity

Machine shop can repair head, so no longer need cross reference info...thanks

Does anyone happen to own a ~2010 DK35SE? My understanding is this the same as a CT335 Bobcat, which I own. I'm looking to see what...

Yeah, I never cracked a diesel before either, but surprisingly very similar to gas engine at least in the basics of...

Good point, forgot about that one...thanks.

So front axle removed and slid forward however oil pan was still a PITA. Essentially, the impeller shaft "I guess you'd call it that"...

Also, because of the way he piston top was hammered, the top ring groove may have been compressed, which would prevent the top ring from...

After looking at all options available, I believe this is the route I will take. Looks to be 8 bolts and steering hoses (possibly) and...

The issue is the piston top is not "pitted" it's actually metal that is melted/bonded to the piston. I might be able to grind down the...

Thanks, I had my brother also looking at the drawing and when he zoomed in he said roll pin as well.

Nope, retainer, spring and all other "top side" cylinder components were in place, just the valve seat itself fell into the chamber and...

So in doing some research it appears that if the engine overheats it can drop the seat due to expansion. I do know that there was...

As the title says, I have the CT335 (2010) which should be the DK35....long story short, need to split the tractor to get the oil pan...

Sorry guys, shade tree mechanic over here...just went back and re-looked at the head and in fact the #2 exhaust valve seat is missing...

Sorry, yes push rod bent, slightly but still bent. My guess on the zero compression, the valve is "chipped" around the base as shown in...

Thanks all, didn't really think about working from my back, since I'm only "concerned" with #2 this approach does make sense. As for...