Recent content by orangeandgreen

Got to do a little disking (actually turbo-tilling) today, until it started raining again. This thing takes more room to turn around than my Kubota.

This thing does a pretty good job. :thumbsup:

Easter Bunny brought me a new toy.:) 1025R

Mos of the check chains I have seen attach to the pin at the base of the top link. You may need a longer 3/4" pin to account for the thickness of the brackets.

Move the lifting struts for the arms to a hole farther away from the implement so they give you more lift. I has a similar problem with a disk and had to move the struts to the front hole to get enough lift.

I had a problem last year with an occasional pressure drop on my sprayer and traced it to the hose on the suction side of the pump collapsing. I replaced it with a "suction hose" and no more problem. When I bought the sprayer new at the local farm store, all the hoses on it were the black...

Needed to get the camper out of the barn, but a little too muddy for the truck. Old faithful handled it just fine.

I have 8 of the Rural King 4500 lumen fixtures in my 30 by 50 shed with a 12' ceiling.

A couple days after having underground service ran to the new shop, I decided to start working on getting the yard back in shape, oh yea, it rained 4 inches the night the backhoe left. The old 4020 saved the day.

Had to put Posted signs up at church last year. Neighbor kids were riding around the gym and all over the grounds. Cut a groove in some 3/4 plywood, filled it with construction adhesive, then screwed it to the T post. Mounted signs I found on Amazon.

So what happened to Howse? Been searching this morning and found a little information about an auction this week for the buildings/intellectual property..... Their website is down and FB page has September as last activity from "them". Just wondering.

Here is one made from a scrap piece of 3/4" plywood

Just did the 400 hour service on my L3240 and have a little issue with my hydraulic filter. I crossed the OEM filter (HHTAO-37710) over to a NAPA gold 7098. Upon removal of the old filter, I noticed a magnet, so I cleaned it and put it in the new filter. The new filter is leaking because the...

Here is a shot of the front, been almost a week since I mowed so the stripes aren't real sharp.

Here is a shot of my little Kubota trying to pick up a small log, ended up dragginh it out of the ditch instead of lifting it out, it's all firewood now.