Recent content by OZisKTB

Here are the connections I have now for the 4:1, I could not attach to original from mobile website.

Know nothing about hydraulics🤨 I want to add a hydraulic powered capstan winch. I have one rear remote with detent to power my 4:1 bucket. I will not use the 4:1 at the same time as the winch, but I will use both on the same task, winch, pickup, winch, pickup ... so I do not want to have to shut...

Did anyone see this article in Aug/Sep 2014 Mother Earth News? What I took from their response to a letter was Mother telling readers to lobby for pick-ups and the like to be regulated using the same rules and MPG restrictions as passenger cars. I don't get it. Most of the advertisers in the...

Based on TBN advice i bought 2 link chains for my R4s for this snow season. Heavy for my old bones, and awkward to drape over. I've seen some nice videos of hooking the chains to voids in the rims, and moving forward pulling the chains over most of the tire. My John Deere lacks voids to...

My place is in a cell blackout area, no cable or other broadband. Have enough experience with satellite to know I'd rather do without. I can a tower 5 miles from my place that the cable company uses. They don't mind giving me internet on the tower, but won't shoot the signal to my house...

Welcome from VA

Welcome from VA, Chomp -- Chomp

So I have a 1/4th acre food plot, and some other smaller ones here in the middle of a mature HW forrest. Lots of hills, rocks and clay. I want to plant legumes, brassicas , sun flower and cover crops around the year. Trying to build soil as much as attract deer. Had a guy plow, rake and...

So I'm new to this. Trying to build my checklists of things I should be doing. Without experience, I'm trying to do things by the book. My 3720 (Cab) Operators Manual says every 50 hours "Check cab protection system mounting hardware torque" Nearly every maintenance procedure is explained in...

Welcome from VA

Rented a 12" max feed, towed, self-feeding, wood chipper to clean up all the dead-fall at my place. Worked great for an hour then began jamming. Opened it up, lots of wood chips packing around the flywheel and knives. After spending more time cleaning out, than chipping took it back to...

Bought a 503 Bush Hog with my 3720. Interested in an iMatch Quick-Hitch, but only if I can make it work with the 503. Understand from dealer that 503 was not built to fit the iMatch. Has anyone made these two work together? What's involved?

New owner, bent the right draft link (LVA14238) on my 3-point hitch pushing my box blade :confused2: backward too hard. Ordered a new one and tried to remove and replace. I removed the bolt and lock nut that hold the Pin Fastener (LVU15084) in place. Thought the Pin Fastener would tap right...

I've been lurking for years, finally took the plunge. I have 5 acres surrounded by the Blue Ridge Parkway, and GW National Forest. Property is large hardwoods, big rocks and clay. No natural level surfaces. I commute here every weekend (3hrs) from VA Beach. I have to plow my way in and out...