Recent content by P901

2013 X300>"372" Converted to K72 transaxle 12x12x24 Turfmaster with chains for winter duty. Moved the governor spring to the outermost hole for a bit more rpm at full throttle. The stock belt 5L780 seems a bit stressed when under full power. A better choice might be the 5VX780...

A post script. While the transmission work was going on with the machine up on the lift we fabricated a set of stainless steel spindles to allow the installation of a pair of X485 front wheels, (Craiglist 75$) Photos, stainless steel spindles, wheels installed. Made a tire pressure gauge...

Good morning, Removed the unit after 1.1 hrs of run time since installing the shims. (Prudence would suggest an internal inspection after such modifications) Everything looking good, unit running very well. Warm but not so much that the hand cannot remain on the case after 1 1/2hrs of pulling...

Ha ! Yes, assembled the day after Super Bowl. That reminds me of the old comment about not buying a Chevy that was built on a Monday, (sleepy workers) or a Friday, (payday distraction). Photo 1 Closeup of intermediate shaft shim. This shim contains the end play of the shaft itself and holds...

Ok, it seems as if I don`t try to do too many photos at once then they will load. Please see the previous post for the photo reference. Thanks again, andrew

Good afternoon, Thanks for the feedback ! I`ll try loading the photos again, I may have tried to transmit to many Megs. andrew