Hi - Working on removing drive side bearing from my MacKissic 12PT10 shredder. Bearing completely distroyed!! (see photos)
I am having trouble removing the existing bearing drive pulley. I removed all the set screws and tried using a bar to pry it off but no go.
Thinking I need some kind of...
I have a Craftsman Lawn Tractor Model 917.273180, 17.5 HP, 42" Mower. I want to replace the seat, but NOT for $180+ dollars which is what it be if I bought from Sears Parts...
I want to make sure my substitute seat has the bolt pattern (see attachment P1020585) so it will slide and fit the...
I have a MacKissic 12PT10 shredder. Rebuilt it (new hammers/spacers) earlier this year and has been running terrific since. The other day my wife was chipping some small limbs and it came to a grinding halt.
I removed the chipper chute and found some wood pieces jammed at the knife. I cleared...
Hi - I am in the process of reversing the rotor assembly hammers on my Mackissic 12PT10 shredder. Some spacers missing also. In order to flip the hammers you have to remove the groove pins. I sprayed pins with WD40 and tried removing pins using a hammer and drift pin. Having no luck removing...
Hi - I am in the process of reversing the rotor assembly hammers on my Mackissic 12PT10 shredder. Some spacers missing also. In order to flip the hammers you have to remove the groove pins. I sprayed pins with WD40 and tried removing pins using a hammer and drift pin. Having no luck removing...