Recent content by perkins78

So I got it all together had a few leaks to fix but not too bad. The log lift has just the right speed 3/8 hose. I'm not sure about the wedge I put a big piece of wet maple 2' diameter had to turn the pressure up to 3000psi and it popped right through. My question is should I cut some of the...

Got the pump mounted today.

Finally got the log lift built. Used 2x2 1/8" thick for the frame. 3" bore cylinder 8" stroke

THis maybe a better option

I looked it over again and got rid of the green line between the two valves here's a new sketch

So right or wrong here's what I did 1" ports it should help with the oil flow

So right or wrong here's what I did drilled 1in holes welded 1" high pressure collars cut off the threads on one end of the collar

Here it is thanks for the great advice

I have searched every image I can find not found a cylinder head like this one. It had six 5/16 bolts with 1/4" allen heads I removed them and have tap around on it not sure if it slides or turns hope someone on here knows how it comes apart. The cylinder came off a boom truck Its going to be on...

Thought I would share what I have been building the past few months. I burn wood with outdoor wood boiler Central boiler 6048. This is my second winter with it and I am very pleased. I get a lot of my firewood in the form of big tree trunks I load the trunks with a backhoe and dump them out on...