Recent content by Peterpiper

So wow, what a wealth ok knowledge Jim and JD! I do now check the level with engine idling. Yes, the vacuum must be pulling the debri away from the screen. The pic of strainer on plastic wrap was last week when I first pulled it out. The savcond time I pulled it out (using the shop vacuum)...

Just bought it Rear lift and steering go out after about 10 minutes of use. When machine and oil get up to operating temp. Checked the pick up screen, found none- can see right through. BTW, used a cold chisel to start plugs open. Used chanel locks to tighten back up. First question-how bad is...

On my 70 135, the shifter doesn't seem to want to move over to the 2nd and 3rd gear position. At this time, I am happy enough using 1st and reverse high and low and don't want to jinx that. Seems like I have to completely remove the steering box to inspect? Was just wondering if anyone had...

I have removed the side pins and the front of the Multi-Power pump. The nuts(pump adjusting nuts) seem to line up with the holes in the wheel, but it just won't go back far enough to get it out. Anyone remember how to do this? Thanks! Gary

So I found a new cylinder off Ebay. Installed it and found one stripped hole. (feel that was why it broke). Got it back together and tested it with wheels off the ground. Feel like its working but when driving it, it's really a bear when going slow!. So I went to test the lift, no go. Took the...

Might be interested in anything you might have. Thanks, Gary

I took this MS 135 apart today to see why the lift wasn't working. This is what I found. I'm not really comfortable as to how the linkages work, (I removed the 2 bolts "from the left/pto control, holding some aluminum thing, soas to not damage anything). I'm wondering about the pipe that is not...

This is what I am up against.

Hi, Name is Gary, from Norfolk Va. I think I posted earlier on the wrong forum. I just bought this tractor, knowing the steering was broke. Took it apart today after filling the pump and finding fluid gushing out from under dash. Found that the steering cylinder assembly case is cracked/broke...

Hi. My name is Gary. I just bought a Massey Ferguson 135 to pull some stumps and regrade my property. The power steering doesn't work and a big reason for that is because the "steering cylinder assembly" has a big crack in it. This makes me wonder if there are other things wrong with the...