Recent content by plasmaguy

Hello Pumpguysc, We're starting back on it next week. The spring tension is an interesting point. I will let you know what we find out. Thank you sir. Happy Easter. Tom

We are using an electric lift pump, the cam operated pump is out of the equation. There's plenty of fuel going to the pump. The solenoid is out and the rack is in the run position.

thepumpguysc, I am getting back on this project. We have installed a rebuilt the fuel injection pump. We are still not getting fuel to the injectors all the time. 1. We have the solenoid removed and the rack is in the open position. I think the rack is always open unless the solenoid in...

Pump guy Thank you for your help. I haven't had a chance to open it up yet. Attached is a picture of the pump.

MTGreen, yes sir, the new solenoid is working. We have fuel at the pump. I have all three nuts at that connect injectors broken lose also.

Thanks guys. I have fuel coming to the pump. I will check tomorrow and report back.

Update time. I installed a new electric transfer pump and in have no fuel exiting the injectors. The fuel solenoid is new also. The only thing I think that can have failed is the injection pump.

Either Napa or O'reilly, their electric transfer pumps come from China also.

Chinesieum pumps

Never runs dry. 2900 hours. Thanks for your help. Tom

Hello everyone. My Kubota is having fueling problems. My first diagnosis was that cam driven transfer pump had failed. Machine has 2,900 hours. I replaced it and problem solved. Several months passed and the issues came back. I tried an electric 12V transfer pump and problem solved. Now as...

My trusty '99 LS 885 has quit running in the normal more. It cut off while running and the panel is totally dead. I have done the following... 1. Checked all fuses. None blown 2. Used a jumper to determine if the seat switches are bad. Nothing happened. 3. Tested battery. Checks fine. My...

Merry Christmas everyone, I broke the factory glass windshield yesterday and am having sticker shock on the OEM replacement glass. $700.00 plus dollars :eek:. Does anyone have any experience on aftermarket replacement glass for this machine? The Kubota PN is V4216. Thanks again, Tom

I am new to this forum and posted my question on rear discharge decks in the wrong forum so here goes. Can someone explain the Kubota design for their r.d. deck. 1. Do the first and third blade counter rotate? 2. Are all blades the same? 3. If question one is true then how is the counter...

I have my eyes on a ZD331 with a 60" deck, rear discharge. The prices have been very close and got to looking on the net and called around and can drive 1.5 hours and save $1286.00 dollars. I understand a dealer needing to earn a dollar but that's a lot of savings. While on the topic of rear...