POGuy's latest activity
-
PPOGuy reacted to RandyT's post in the thread Need help picking correct oil for my 25 year old 19hp twin Generac generator with
Good Post.
All of the modern small engine oils contain ZDDP So Briggs, Kohler, Honda, Stens, Kawasaki, Kinetix, other brands small engine oils... -
PSorry to say buy your local machine shop sucks. Glad you were able to find a replacement though
-
PHeck, even if you have to put a couple of grand into parts, its a steal.
-
PAir in those tires should be the first order of business. Hopefully they are not cracked and will hold air. Once you have flotation...
-
PYeah I think we need to steer clear of using explosives to seat a bead if you are a beginner.
-
PPOGuy reacted to vagem55's post in the thread How hard is it to learn to use a rental mini-excavator? with Good Post.
I've also rented on weekends. Most machines have hour meters. Over eight hours (with a little leeway) is charged either proportionally...
-
PPOGuy reacted to tankueray's post in the thread Both lift cylinders began spewing at the same time, what have I done? with Good Post.
Yes! I learned that the other night, thank you! I'm used to air and water hoses, and only a few work like that, but the hydraulic ones...
-
PPOGuy reacted to daugen's post in the thread Buying Advice Tier V emission standards soon for new diesel engine tractors? with Good Post.
tell that to my 55 year old nurse wife that died of cancer. your statement is remarkably insensitive and adds nothing to the discussion
-
PPOGuy reacted to rScotty's post in the thread Buying Advice Tier V emission standards soon for new diesel engine tractors? with Good Post.
I hate the bureaucracy, restrictions, and the manufacturing costs that come with these EPA mandates. And I definitely don't like...
-
PJust be aware that those saplings you are cutting off 6" tall turn into spears as they dry out...they like to pierce tires.
-
PI would not pry or try to force the shaft apart. You could cause damage that might not be covered under warrante. BY ALL MEANS -...
-
PI've seen older shafts seize, but never a sudden stop on a new shaft. Maybe there is some minor manufacturing defect? Shafts have pretty...
-
PWas a welder for many years the truth is if a weld is properly applied the weld will be stronger that the surrounding metal. I have seen...
-
PFor clarity I had a three point type mount like some have pictured. In my situation chains or not same ending, unless the chains were...
-
PWhat would you like to know. It was my second design for a three point trailer hitch. My first was just a ball for a qooseneck on a...