ponytug's latest activity
-
ponytug reacted to sixdogs's post in the thread Need advice installing a propane shop furnace with
Good Post.
Excellent advice. I'm about to abandon the used furnace idea and return to sender. Stay tuned. -
ponytug reacted to 2manyrocks's post in the thread Need advice installing a propane shop furnace with Good Post.
If the combustion is not properly vented, you can get lethal carbon monoxide. Also, must have proper supply air. This is the reason...
-
ponytug reacted to CH4Ohio's post in the thread Need advice installing a propane shop furnace with Good Post.
I'm not sure you want to hear this, but here's my opinion . . . If some engineer at Lennox tells you how to do it, or what to modify in...
-
ponytug reacted to 2manyrocks's post in the thread Need advice installing a propane shop furnace with Good Post.
I suggest looking for the installation manual. What I remember about direct vent water heaters is they used a fan and had different...
-
ponytug reacted to 1Mech's post in the thread what on earth does electricity cost near you? with Good Post.
My Feb. electric bill from Public Service of Oklahoma was $58.54 for 322 KWh of electric, including taxes and fees. Not too bad compared...
-
ponytug reacted to ultrarunner's post in the thread what on earth does electricity cost near you? with Good Post.
Seeing 20 cents and less kW pricing that is about 1/3 of my California rate is still eye opening.
-
ponytug reacted to EddieWalker's post in the thread Floor Treatment for covered Screen Porch with Good Post.
I'm a big fan of the wood looking ceramic tile. Especially the ones that really look like wood!!! A note of caution with long, thin...
-
ponytug reacted to jyoutz's post in the thread Floor Treatment for covered Screen Porch with Good Post.
Something that’s popular in the southwest: if you have a reasonably flat concrete floor, just dry set clay bricks with no joints. Then...
-
ponytug reacted to EddieWalker's post in the thread Floor Treatment for covered Screen Porch with Good Post.
My biggest reason for not getting them all at once is the amount of money it will take, and my main focus has been on fencing in a...
-
ponytug replied to the thread Forum for air cooled diesel engines and clones.@bmaverick Thanks! All the best, Peter
-
ponytug reacted to CPTKILLER's post in the thread Forum for air cooled diesel engines and clones with Good Post.
While not that common in the USA, Deutz diesel engines were a good option for the Army Quiet Generator program. My company manufactured...
-
I think it's a matter of they got a good thing going, why change it?
-
OK... 25hp is 25hp no matter what's making it, a gas or diesel engine. It's 25hp. That's fact. You'd need a 25hp motor to drive the...
-
I sometimes find un-opened Mercon ATF on the free table at the Household Hazardous Waste facility where I take used motor oil. Then use...
-
This RR is a few miles west of Santa Rosa. This, and the nearby Chevron, have the only red diesel near me. Chevron's price is similar...