Recent content by PsRumors

Great info, I'll be contacting them Monday about outfitting my L45 with a quick attach.

Not sure there will be that much of a gain. My 326H has a 72" deck with plenty of power. With that said, I am a proponent of more power. If you need an engine, a 331 would be easy but how about sourcing an 1105 turbo? I built a Grasshopper 928D that had a blown up engine. Found a 34hp 1105 Turbo...

When we replaced the 2 systems in our house it took us interviewing over a dozen companies before we found someone willing to do the manual calculations. We knew we had duct issues just from a couple hours of reading, also knew we had too much capacity. The Trane we had installed never worked...

I'd change it. But I wouldn't be able to sleep thinking about it and if anything did ever happen that would be to blame

Not true, spoil may be to wrong term but it will start to crystallize. That's why dpf systems have a way of sensing quality. Our m6-131 has been in the shop 3 times for issues, it has 2200 hours on it. All three times it go an updated replacement def pump, sensor, injector and all 3 times a...

There is no way it is "almost identical" and weighs half the weight, just not possible. I've looked at several $1k grapples and none of them have bushings and greaseable pins, they're using bolts and nylon lock nuts as pins, none of them have the clamps come down on steel, rather they free...

What is a good grapple for the L45? I picked this Caterpillar brand 72" grapple up for a deal but it really is to heavy. The build quality is excellent, greasable pins, 1/2" steel, good cylinders but 1050 lbs. If I could get this quality but with 3/8" steel it would be 200lbs lighter allowing...

For my L45 it was $985 me installing $1137 dealer installed.

I towed the L45 home from northern TN, about a 3.5 hour trip which included the interstate and Mount Eagle. The Ecoboost could actually pick up speed going up the mountain and handled the weight just fine going down. It's all good, keeps things interesting

Gave the Bota a little love. The loader valve cover was beat up pretty good and the cover for the filters was missing. Also, for Christmas got a 3rd function kit. I'm not impressed with the handle, seems kind of cheap but I'm sure I'll get used to it.

See the pic, the instructions state the hose with the red tape....neither hose has red tape and both hoses have the same ends and are the same length. I'm assuming the "out side" is the return, how do I determine which is the return at the block? And does it really matter when both hoses are...

Christmas in September....then need a grapple and hydraulic auger

I had my heart set on a nice 135 but in looking at the next series (235, 240, 245 mainly) am finding it easier to find nice low hour tractors. Some of these, like the 245, span through the purchase by AGCO and makes me wonder if quality changed any. Would there be a reason to purchase either a...

I am wanting an 84" to 96" rear mount finish mower but need a tractor to run it. I have my L45 for loader and backhoe work but it is down on PTO hp and the loader isn't removable. Price point, the less expensive the better. $7k is about max. Diesel is highly preferred. 2 wheel drive is fine but...

This...