Sorry posted in wrong forum first time!
Have a 2002 Allmand backhoe with the 25hp Kubota D1105-E3b engine with 1115 hrs, yesterday while operating at about 1/2 throttle i moved the machine and noticed engine oil on the grass and shutdown immediately, appears that the large round housing under...
Have a 2002 Allmand backhoe with the 25hp Kubota D1105-E3b engine with 1115 hrs, yesterday while operating at about 1/2 throttle i moved the machine and noticed engine oil on the grass and shutdown immediately, appears that the large round housing under the injector pump (governor housing?) has...
A weight distributing hitch is not part of the trailer it is a special ball mount which has sockets built in for weight distributing spring bars , you then add a set of "snap up brackets" to the A frame of the trailer, the snap ups attach quickly so they could be moved from trailer to trailer if...
Looks great ! I like that the pieces have the modern style as see on a commercial backhoe unit.
You mention CDP so I assume either the pivot weldments were bought from them or cut to their template, I just find it odd that the ends of the pivot weldments are straight were the get welded to the...
Bad news , your symptoms seem like a no flow (or very low flow) issue, turns out rather than a priority gear pump or priority divider terramite uses an adapter plate in the trans to supply steering flow. So i'm betting that your troubleshooting will lead you to the transmission. You may be able...
The 2 hot wires indicate that it is a 2 coil solenoid , internally a larger coil gives it the power to pull the actuator rod in and then a smaller coil holds it, I have no way to tell you which hot is which but the stronger one should be powered only when the key is in "start" and the other one...
I have a 425 ESL, the hoe end is very stout on these machines, all the pivots use "Garlock bearings" their name for heavy bronze bushings covered in grease holding dimples on the inside. Mine had 1000 hours when I bought it and play in the backhoe pins was too little to detect, if any joints on...
I do some work for a small town government, one of the older traffic signals in town is having a momentary line power interruption problem, because it's older it doesn't self reset and will go to flash in all directions creating a snafu until someone gets over there to reset it. It is a very...