Recent content by RadarTech

I should have been clearer.. I’m not going under the tractor.. I’m going out at an angle to the side… since it is a PTO chipper and there isn’t a secure place to mount it on the chipper I can’t do that.. that’s why I included the link to the chipper so yall could see it.. Look at this rough...

Folks, I’ve been thinking about this since i got my chipper.. and since spring is around the corner I’d like to tap the hive mind for either a thumbs up, down, or don’t do it…. I have a bolt on set of hooks, loops, and Reese hitch. https://a.co/d/au8ivr4 It is fasted to my bucket with 10 grade...

This is a pulverizer

Revisiting this a year later.. In the last year I picked up a 6ft pulverizer… so my thought is to use it to soften up the dirt.. then till it.. that should be a good means to prep it for grass.. Thoughts?

I read all these posts, then I looked at cost and purchased a woodland mills TF810…today was the first day using it. It is an 8 inch chipper behind a Yanmar yt359c. We chewed up oak, and everything else below 6 inches like candy.. I have not tried anything bigger.. I would not consider anything...

Thanks! I literally came here to ask opinions on these two companies. I’m looking at the WC88 vs the 8H since I have 52 HP at the PTO. I considered the TF810pro …but I dont know if the second flywheel is worth it.. I wonder if anyone has that model here.. I’m in western NC, and I see lot of...

Ok.. I’ve been looking all over for a side link and it appears that I’ve totally missed the bus. My fixed side link is 19 or 20 inches depending on which hole I use on the fork. As I understand the use of a side link, it would be best to have 4-5 inches of movement at least…. Some have said...

Yea the rattler is for sure a concern. In 17 years I have only seen one here…. But copperheads I have seen dozens… so yea I watch out carefully!! I used to have a small 5 ft finish mower that used on the little Kubota.. it was ok.. but that mower went to a new home 10 years ago..

Which ones do you have? At 6500lbs I think that is pretty heavy for a small tractor. Thanks!

So I’m struggling to choose between a boom mower, or an offset flail. My tractor has 2 rear remotes and I’ve got a Yanmar yt359C. Yanmar specs say 52hp pto some other sources say 46… Yesterday I spent 3 hours weed-eating where either of these could have made it maybe 30 min or so.. a lot of...

I’m curious. Has anyone here put a GMRS RADIO in your tractor cab? We are fairly mountainous. And cell coverage is not so good… so I’ve considered it… Thanks.

Just a little brush moving and tree jousting! Working on cleaning up some property.

Hello! Many times an issue will hit us and not always does someone find it, and fix it and post it.. so here is mine.. The factory 3rd function on the 359c wasn’t working with a new grapple.. so I wondered if it was a blocked hose, etc After checking everything I could think of, I started...

That’s what I said too.. still trying to figure Retta out

Like this one.. I’m like no way...