RayIN's latest activity

I forgot about those, and I have 4 in my toolbox. Good catch!

Take a close picture of your paint with your phone camera; take it to WM or any store that sells rattle cans of paint and match your...

Correction! You are not getting old, you already are old. Just wait until a gray-haired woman opens the door for you_ reality sucks.

You sure it was engaged when only one wheel was turning? Many tractors have little to no indication as to whether the rear differential...

Instead of following the plow rows, use the land °plane,W scarifiers, diagonally over them, then at 90° to the previous pass. Then...

Land plane; but it means re-seeding with your choice of seed. FWIW, a land plane requires 7-8HP per foot of width.

When I first looked at your pictures, I immediately though of AL soil; looking at your avatar confirmed my assumption. That IMO is a...

I've purchased those hitch safety pins from several different suppliers, none are actually ¼"/.25"; they measure closer to .2". IMO...

FWIW, I have the Goodyear 14.9x38 Dynatorque tires on my farm tractor, they give a very uncomfortable ride on hard surfaces at low...

Me, I would use the FEL to move a generator and a concrete mixer to the job site. Mixing that much concrete is no small undertaking...

I mixed concrete on the bucket by hand using a shovel and a how. Man that was a workout and a half! Granted, I tried to mix almost an...

I buy Lynch pins by the dozen at flea markets, the last I bought were $4/dozen. I buy a bag every time I attend a flea market if they...

I have a friend that went to a Kubota dealer to buy a new 35-45HP tractor. The dealership owner ask Mike what is the intended purpose of...

Look for a pedal like this. Picture from this thread. Traction - MF 231S It is not unusual for differential locks to become stiff...

I'm 82 I moved my rears out 3" on each side with only my CC. It took one young man (My guess is he weighed 130#) 20 minutes using his...