I hope someone can help on this.
I know what its called, but the dimensions of my part are causing issues with replacing this work out part.
The part is from my 1963ish MF50 high clearance tractor originally from Canada. It screws into the steering bellcrank on the hydraulic cylinder.
All of...
I'm curious as to the actual diameter of the steel balls on the new FEL service kit offered by Kioti.
The original 2008 nylon moldings are 14mm on my FEL but there is no mention of the diameter of the new kits parts.
Does anyone have an idea of their size?
Thanks,
Ray...
I have a 2008 CK35HST and am having a issue with the 3pt lift control.
It seems that between 0% and 70% there is no movement in the lift arms. All of the range of motion of the arms is controlled by moving the control from 70-100%.
Is there an adjustment that can be made to allow full use of...
Hello,
I've generally been very happy with my 2008 CK35 and was going to make the final payment this month, but guess what?
Today after changing the oil at 620 hrs the engine would not turn over, it initially turned over a little maybe 15 degrees but stopped and the started just dropped out...
I have a 2008 CK35 HST with 400 hours.
This has been a great machine, but recently it has been increasingly hard to start. Temperature is in the 30s at night and around 50 when trying to start. Turning the key and allowing the glow plug to cycle only turns the engine over with whitish grey...
I'm currently trying to mount a Taylor Way 766 backhoe onto a Kioti CK35, using the Kioti sub frame.
Does anyone have a photo of their 766 mounted on a sub frame of any type.
It sure would help me in my journey.
Thanks,
Ray...
I recently purchased one of the anniversary CK35s with the KL130P loader.
The pin spacing at the bucket is 5.625" this seems close to me. There is lots of curl and dump but not a lot of breakout.
Here is a drawing of my bucket.
I would like to hear from others what pin spacing or bucket type...