I had my sector shaft break on my tractor. Found a replacement and finally got it installed. Everything is put back together but my steering is very difficult almost like I no longer have power steering. Any suggestions? The steering, hydraulics and PTO all are fed from the same hydraulics...
I have a 99 Kioti LK 3504 tractor that has been a workhorse for over 15 years. I broke the steering sector shaft and have it replaced, but not sure how to properly adjust it and refill the steering box. I also need to get the connector off the broken sector shaft. Any ideas?
I am in the process of changing a broken steering sector shaft on a 99 KIOTI LK 3504. Once I get it back together how do I add oil to the steering box?
I broke the Steering Sector shaft on my tractor and desperately need some advice and assistance. I have ordered and received a new Sector Shaft but I cannot remove the broken one. I have removed the cover on the right side of the steering box but the 3 teeth on the sector shaft hit on the bottom...
I broke the Steering Sector Shaft on my Kioti LK3504 tractor. I have a new sector shaft but the cover on the right side of the steering box does not want to come off. I have it loose, is there a trick to getting it off and the sector shaft out?
I bought my LK 3054 used with a front end loader. THe loader bucket has what looks like a tooth bar welded on it. It has 7 square holes evenly spaced across the front where teeth would go. Does this sound like a tooth bar and where can I buy teeth for it? Do the teeth bolt on?
THanks for your help.
I am looking for a small grain drill that my LK 3054 Kioti (30 hp) can handle. Does anyone know of any? I have about 30 acres of hilly land to get planted in Lespedesia this spring. I raise boer goats and need to reseed several clear cuts.