repete's latest activity

Mine shuts down if it is beyond the ability to self level. I also check mine against a water level at about 75'. Set one end of the...

Best of luck. Keep us apprised of your progress. It looks like pictures of some sort of linkage from the Titanic.

Sounds like a piece of heat shrink tube on the brake pin would be good insurance, if it would allow the case to close, some of them have...

Have you sprayed all of the joints with penetrating oil and GENTLY tapped the linkage back and forth to see if you can get any movement...

See if you can back off the clutch adjustment to create free play in the clutch linkage assembly. It might be a process of elimination...

If the clutch disc is stuck the throw out bearing should still release and get movement. Do you have an inspection plate on the right...

Spray your oil on the OUTSIDE of the shaft where it enters the housing. Probably a good thing you didn't find an access plate. Spraying...

Is this to be switched with the ignition or hot all the time? If hot all the time, just add what bcp suggests. If it is to be switched...

Which hose did the previous owner replace?

He has a burr up his A-- about something or another.

My experience has been that it's easier to mix one bag at a time. A bucket full of concrete would be a lot to have to mix at once...

Any grease vs no grease. Any grease wins. :)

Should be a drain plug on the bottom of the gearbox. If it'e leaking, the Corn head grease. If it's not, any gear oil, brand irrevelant.

80-90 vs 75-90, not difference in my mind. The fact is it is going to really like regular changes with clean grease. I have for years...

I have an old 5' brush hog I use for mowing rough stuff. I do not know the maker. My question is are the blades and bolts generic for...