Recent content by Rgwitt

I looked at that linkage and thought about how difficult it would be . I’ve got the backhoe and the plates for that would need to be removed as well. I do know I’ve got an elongated hole on the shaft causing some of the problem . As much as I like the mowing deck on this tractor I think I will...

Got there , found what I wanted. Thanks for the help

Thanks, I did go to their website to try to find information. Frustrating to say the least. I’ll try again

By the way, can I ask where you got the parts explosion from? I could not find one anywhere. Those are really helpful . Thanks

Thanks for the input. I have a full understanding of the height adjustment knob and am using it correctly . What’s happening is that I would like to use the adjuster to set my mow height , but due to the linkage issues ( and as you point out , the weight of the deck ) my deck lifts and lowers...

OK , thanks. Mine was situated the same 1/3 . I adjusted mine in about 1/2 of the threads . It made a positive change but didn’t get the deck get all that a need

Thank you. It looks like the lift shaft has some play at the pins but is straight. Thought maybe that was the issue, but what you describe that your deck does after replacement I think I’m okay there. I looked at the shaft and can see the difficulty. I’ve got the TLB and the framework for that...

Hi all, new here looking for help. 60” MMM dive over. When I lose the deck the right side goes down about an inch or more before the left side moves . I tried adjusting the link and it changes somewhat but not enough. The manual says adjust upper link and under link. I can only find one...