Recent content by RichardDLee

Hi Everyone, I have a 3110D and it has developed a leak right on the centre casting of the front axle. There is a bolt in the bottom of the casting, I assume the sump plug for draining? I cant yet tell if it is from one of the bolts and it is running round, down and off the central bolt or if...

Hello, I have made a tooth bar using steel. I had it laser cut for ease and then welded it up on the bucket to ensure it fitted. Nothing difficult and it is rough and ready but it will do the job. Welded some hooks onto the front at the same time. I'm sure you've seen the same design...

Hello, My tractor has developed 2 leaks at the same time, seems a bit unlucky. One is on the front right wheel and I have attached an image. The other is underneath roughly in the middle of the tractor and I have attached an image. Both are at joints. Are they both going to need the seals...

Hello, Hoye have given me all the information to replicate the Hoye Turf Kit over here in the UK. It would involve 315/75/16 4x4 tyres on the rear, Maxxis Bighorn or similar and some 23/10.50/12 on the front. Some kind of Carlisle Titan Turf or Kenda Terra Trac possibly. I want to swap wheels...

Hi everyone, I'm in the UK so don't have the ability to buy the turf kit from Hoye. I am trying to get a UK company to manufacture some wheels but I can't find the inter axle ratio number anywhere. Does anyone know it for my tractor? Does anyone know where it's stamped on the tractor? Can...

Hello, I have just bought a second hand Yanmar RS 1303 tiller in pretty good condition. The problem is that the PTO shaft is too long. Now it's not a regular new type of shaft which is nice and easy to shorten, it's a solid cylinder of metal splined for the last 6 inches and just plain...

Hello, I have a small leak on a connector on my new tractor's FEL. I have attached 2 images of the connector and honestly don't know anything about hydraulics but am more than willing to learn. I have tried tightening it as much as I can which has slowed it but it hasn't stopped. Do I need...

I have a transport box on the back of my Yanmar1610D, it's used to throw stuff in and also to offset the weight of the FEL on the front. I want to be able to tow a trailer and don't want to have to remove the transport box as I will be towing the trailer to somewhere I will then unhook it, fill...

Tractor came today, very excited to finally get it. It is a Yanmar 1610D with a VTek 1A loader and a Beaconsfield transport box to lug things around and it helps balance it out. After everyone having a drive and the kids being driven around in it I finally got to have a practice with the...

Hello, Anyone know how much they will lift on the rear 3ph? About to make a frame for some forks but wanted to know what capacity would be left once I had taken the weight of the frame and forks from the total capacity. Thanks.

Hello, I have bought a Yanmar 1610D with a VTek V2a loader. I would like a tooth bar but can't seem to find a British supplier, I can find individual teeth but not a bar like the Piranha you have over there. Anyone in the UK know a supplier or is it a case of making one/having one cut? Thanks.

Hello, I am waiting for delivery of my Yanmar1610D with FEL in 2 weeks time. I know I need to keep the tractor balanced and know that I need to keep enough weight in the back to counteract the front but if I have a rear transport box on the back, how much extra weight do I need to put in it...