RjCorazza's latest activity

A picture may help.

Glad you got it back on without damage. Any ideas on what caused the problem? Was the fel recently removed / installed? I've read about...

Cool ideas in this thread. I put up 2 sections of new racks last year, and they are a game changer for me. My larger implements (flail...

I carry a small kit in a zippered pouch on my zero turn while out on my route, and in the tractor cab. Consists of a few 4x4's, a small...

I never replaced that o ring on my previous L3410, probably not the larger one either. They always looked good and fit well.

I forget the actual temperature, but somewhere around 120 degrees F is sensed as too hot to touch. I checked my transmission case with...

I believe the possibilities are : Faulty radiator pressure cap Deteriorating hose Clogged radiator passages. I would replace the...

Tight budget for a 4wd loader tractor capable of handling a 6-7' brush hog. I suspect you would want something in the 50hp area for...

The problem with tractor hydraulic / transmission fluid is that there are no industry wide standards like in engine oils and API...

I use a thick rubber bungee cord to support the hydraulic toplink when not in use. It works well.

Yes.

Looks like a bleeder valve to clear air out of the fuel line.

Del Morino Centurian Super, 62" ditch bank flail with hammers. It eats brush and saplings, and leaves relatively evenly distributed...

I agree that 30 pto hp is a good starting point for a 6' brush hog. There will be operators with less hp and lighter conditions running...

Years ago I applied a product called Milky Spore bacterial powder, after several years I have no grub damage. It takes several years to...