Recent content by roadtrash

I'm getting ready to do a 200 hr service on my 3010. The manual is a little confusing concerning getting to the trans. filter for cleaning. Looks like I'll have to remove a spring and deal with o-rings, will there be any pressure or oil leakage to deal with and what's the chances of damaging the...

Just a quick question, what's the difference between Kubota UDT and Super UDT?

The manual on my 3010 tells me to change the hydraulic and transmission oil filters at 200 hrs. yet I don't have to change the transmission fluid until 400 hrs. Won't removing the filters without draining the oil first cause a mess ( loss of oil) trying to get the new filters back on ? or am I...

My 3010 manual says at 200 hrs replace hydraulic oil & filter and at 400 hrs change transmission & filter, the book shows the drain plugs are the same. whats the difference between the two? I'm confused.

I have what appears to be a leak in my FEL pump on my 3010.After use I notice a little hydraulic oil on the floor, I cant pinpoint the leak but when I move my fingers around the bottom of the pump I get a little fluid.Is anyone aware of any particular problems with the pump? also how tough is it...

I've got a 3010 with a minor problem, the throttle lever works fine to about 2000 RPM, when I want to increase the RPM the lever becomes extremely hard to pull down, is there any adjustments I can make to loosen it up a little. I would appreciate any info. Thanks

I know this subject has been discussed before but I can't find anything under previous posts. I'm ready to do a 200 Hr service and I want to find out what tips and advice is out there to make it as painless as possible. A couple of people have told me it's a real pain, so I'm asking the people...

Sorry guys.....I was in a hurry this morning and I had my head up someplace where it should'nt be...I know better, I apologize..I'll try again ,I have a 3010 that I want to perform the 200 hr service myself. I plan to wait for warmer weather but I'd like to start researching it now, keeps the...

Getting ready for my 200 hr service any pitfalls to avoid? any help or tips will be appreciated....Thanks

I just finished my 100 hr service on my 3010 ...(what a pain but cheaper than the dealer, I'll get better with practice) I could not unscrew the retaining ring for the fuel filter and I'm a little nervous about using channel lox...I wold appreciate any suggestions.

I'm getting ready to do the 100 hr. service on my 3010, a friend gave me two gals. of Shell API-CL-4SL 15w 40 oil which he says will work fine, Will this oil work ? it's not listed in the owners manual and I'm a little nervous about straying from the book. Also ..is there a good place to order...

What is better when usuing a block heater, having it plugged in all night or plug it in a half hour or so prior to use?

I need some advice here folks...I just got a new Lawn Pride 6' back blade and all I'm doing is tearing everything up. The user manual is no help, any tips or advice will be appreciated.