Recent content by robertsa

  1. robertsa

    Tier 4 emissions Kubota L4760 reliability

    We've been very happy with our L4060.
  2. robertsa

    M-7060 rpm limited to 1800

    I too have an M7060; the exact same thing happened to me after sitting for a while near the arena. Turns out mice chewed up the injector harness and some of the hoses for the emissions. I hope it's not that issue for you. That was an expensive repair.
  3. robertsa

    Price Check  Kubota M6060/7060 price check

    I've got two quotes from the same place; both are new 2020 models. One quote is for an M6060HDC at ~$46k plus $1050 to add a second rear remote. I was somewhat more interested in the M7060HDC12 for the extra gears and limited slip front diff. I was quoted an additional $4100 to step up to that...
  4. robertsa

    New to site LS Tractor owner

    You said it doesn't move in fourth. By that, do you mean under load or just trying to start on flat ground while performing no work? Do the rpms drop at all when you let the clutch out? Any smoke out the exhaust? Here's the troubleshooting guide from your manual for engine and clutch troubles:
  5. robertsa

    Your towing rigs and trailers

    Hit the button I circled in the below picture, select 'From Computer', select 'Choose File', select the photo you want to upload, and select 'Upload File(s)'.
  6. robertsa

    how to mount a tactical shotgun

    In an attempt to get this back on track, it appears that what most people do is repurpose the vertical wall mount to bolt to either the ROPS or if cabbed, the cab frame. Looks like the right answer to me if that's what you want to do. If you spend more, you can get a locking version as well...
  7. robertsa

    PICTURES ONLY thread

    I got posts drove using my new Shaver driver. Currently getting pens welded up in this 100F weather.
  8. robertsa

    how to mount a tactical shotgun

    Just search for "vertical vehicle shotgun mount" and buy whatever tickles your fancy.
  9. robertsa

    Loader  XR3135C quick disconnect assistance

    Does anyone know what size/type male and female quick disconnects are used at the FEL and the OEM rear remotes on an XR3135C? I have searched both the tractor and loader operator manuals and can't find it. I called my dealer yesterday, but the technician is out until Monday; unfortunately the...
  10. robertsa

    PICTURES ONLY thread

    A couple of our hens made a sinkhole today while supervising the new coop build. Your sinkhole may have been more accidental.
  11. robertsa

    Oil & Fuel Oil question

    The weight is based on temperature. From your manual:
  12. robertsa

    F150 Diesel

    No. Apple makes you stick with Apple's navigation, which I'm sure you've found by now is as bad at navigation as Siri is at voice recognition. You would need a smartphone with an Android OS. My Pioneer AVH-4200NEX runs great off a Samsung S7. I am always running Pandora One or Podcast Addict...
  13. robertsa

    Commuting

    I used the initial 5 year estimated cost of maintenance and repair; there's not much else available for vehicles past that (that I know of.) I assumed $3,000 to buy an 80-100k miles 2005-2008 Ford Focus, used $2/gallon for fuel, the EPA rating of my truck/car, having every other Friday off, and...
  14. robertsa

    Radio wiring for XR3037HC cab models

    I made these for a different reason but using the same concept, you could build spacers to give you the room you need to go from 4" to 6.5" without enlarging the holes.
  15. robertsa

    3.5 Ecoboost questions?

    I've only owned pickups with 8' and 6' beds so was concerned when I purchased my F150 with the 5.5' bed when it came to picking up lumber/etc and towing. Since I have a 20' gooseneck and a 6'x8' trailer the picking up materials thing isn't a problem, and the gooseneck is fine due to the design...
Top