Our Case 970 with selectamatic transmission quit moving. it will not move in any gear. I don't know what to check before I say split it. we checked hydraulic pressure going to each clutch package and all are in recommended range. I've read that it could be torque limiter, is there a way to check...
we have a 1086 here with the same problem, we put welding lead disconnects on the positive side and disconnect if we are leaving it for any longer length of time. you can fit them in anywhere on line and if you install the female side closest to battery it will be protected from shorting on...
I'm going to give my 2 cents and say if you hammer the shafts so they are straighter then the hooks will have a better bite, possibly after a few years of pulling logs the tension bent the arms and straightened the hooks somewhat. I also think that if you have two smaller logs like a fence...
I firmly believe that every new thing is a result of lobbyists petitioning gov't to sway the market into their favor and provide them with huge profits at the expense of the little guy who has to pay for it either outright or through their taxes. I am not against ev's but I am against giving out...
I used to think if I ever bought one of those small horizontal/verticle splitters I would set it on a hay wagon in the verticle position and work from the side. never bought one but built my own splitter to my desires. I'm now over 60 with a bad back but can stand at this table splitter for...
I made these for feeding lambs. One plastic barrel plus one plastic oil pail cleaned out real well. bolted together with a 6 inch hole connecting the two. leave an inch gap or so at bottom of trough. the extra barrel on top is so we can pour feed in from upstairs, not recommended to fill both as...
I threw a couple pics on the wood handling thread but thought I'd add it to this one for anybody not seeing the other. I put this together using the square tongue from a corn planter for the vertical beam, the table and 3 pt hitch is from a scrapped snow blower, the bottom legs are from a...
I often notice some posters have a tagline that states that message was sent via tbn phone app. I am wondering where to find the instructions for loading the app to my phone.
There is a tractor auction happening near here in about a months time. One of the offerings is a massey ferguson 3650 that needs the front pinion repaired. The only thing I know about it is the fact there is a sign on the cab door that says do not drive, needs front pinion gear. What would be...
I would like to take an engine that was on a swather with a variable belt drive and convert it to drive a pto shaft. I would like to have a clutch while eliminating the belt. Does anyone know of anything that would suit the purpose as a clutch and stand up to about 40 hp input. The application...
I work nights and have a lot of time to think as I work and last night I got to thinking about putting in a line to supply fresh air to the woodstove. I am going to build a porch next year anyway and thought that while I have it dug out I'd put in some underground lines to warm up the air before...
Question #1
I purchased a used 3 spool valve which has an extra port that I'm not familiar with. Would it be part of the pressure relief but using an extra line to return to tank or might it be for a power beyond type of application. It is located right beside the outlet port. What purpose...
I still am having a problem going back one page at a time. I have logged out but still can't seem to back up one page, sometimes it works if I double click fast but half the time I will jump two pages. What's the answer to my problem.