Recent content by rokryder

Definitely still under warranty. Dealer doesn't have a mobile tech. My dealer is more of the "sell them the tractor then forget about them" type. They repeatedly drop the ball and don't follow through. They can't seem to even successfully order parts from TYM. Unfortunately, they are all we have...

After sitting for about two months, I topped off my T25's fuel tank with about four gallons of diesel. However, the fuel gauge is still reading only half of a tank. When I unscrewed the filler cap, it appeared as though the tank had been under pressure. I saw a video of a TYM 224 that had a mud...

I had the same problem trying to reconnect the lines to the backhoe on my T25. One went on just fine, but nothing I could muster would let me reconnect the side with the check valve on the loader hydraulic line. I was advised to crack the Pioneer fitting loose from the line just a little bit to...

Has anyone compiled a list of acceptable oil, hydrostatic and fuel filter alternatives to the TYM branded ones for the T25? I do plan on using OEM filters, but would like to know of equivalent name brand filters that might be more obtainable in the future. Kim

Rich, my sincere condolences on the loss of your wife and best friend. On the grapple subject, I purchased an IronCraft 60 inch that I use on my TYM T25. It has met my expectations admirably. I had been interested in the EA Wicked Grapple and looked into ordering one last fall. When I discovered...

Absolutely! It’s been a game changer here and enabled me to easily tackle tasks that I would have way more trouble completing—if I even could do without it.

Well mine don't really work. Only a quiet, tinny sound from the right speaker and nothing from the left side. Evidently, something in the ROPS wiring harness is messed up. The work lights just blink on either side and there is a whine from the Bluetooth speakers. If the fuse for the Bluetooth...

Actually, mine was ordered direct from the warehouse in Georgia with R14s, they were not a dealer installed option. The R14s are not Goodyear, but Korean Tirons. Very pleased with them so far. Like many things TYM (owner's manual--cough, cough), the provided information is either missing or...

But R14s are now an option on the T25.

I have made a post or two recently about the difficulty I have had trying to steer my new to me 2210 with a load in the bucket. I have been picking members brains about adding power steering and what all was involved. I again want to thank all for their help and suggestions. I got somewhat...

Actually, the loader is red. It's labelled as a "Bulldog 285" and looks like the others I have seen photos of, both red and black. The valve has no brand markings on it. There is a "P" at one end of the block (pressure) and an arrow pointing to a "T" at the other end of the block (Tank). There...

I want to put power steering on my 2210 with a Bulldog 285 loader. I am ready to purchase the kit, but seeing Scotty Dive and JTullius' posts where they utilized the power beyond port on their loader valves, I find myself stumped with regards to my (viable) options. I don't know if my loader...

I was doing some clearing yesterday and went to push over a dead stump with my box blade. I lost traction in reverse, but I noticed both wheels spinning. Dumb question, but does this indicate that the differential was locked? I pulled up on the diff lock but both wheels still spun in reverse...