Recent content by romoni

I ordered one today, might take awhile, they are not a big seller.

I tried running a hose from the bleeder back into the transmission fill port with the engine running but there was 0 flow. I then tried with my vacuum pump and my wife pressing the pedal, of course after having pumped it several times, I get mostly air and after repeating this about three times...

Thanks for the schematic!

Well, haven't solved my brake problem yet. After removing and cleaning the inlet screen in the master cylinder and trying to bleed the brake system the best I could, the problem remains. Especially the right hand brake, still needs five to six pumps to get it to firm up. Is everybody stumped...

Thanks Jchonline but I already received one.

You're right, I did too, now I gotta bleed the system. I'll do that outside tomorrow while the temp is not too cold.

I am gonna take the master cylinder apart after new year's, I suspect a plugged screen, I'll see. Gotta remove the loader, bonnet and dash assembly to get to it. Happy new year!

These are wet brakes, the oil for the packs are being supplied by the transmission oil.

Yes they do, the trans oil goes through the steering then keeps the brakes master cylinder replenished.

It will be my next move tomorrow. Thanks!

Nothing there for the 7060, good try!

Thanks!

From what I found out the master cylinder has a constant supply of transmission oil.

Just ordered one today!