Recent content by ron45

Hello everyone, been a while since I stopped bye. I need some help as usual. How complicated is matching up a Kubota seat with my LK3054 seat mounting area? There are way too many choices on line with no way to know if any of the holes will match up. I figured Kubota cuz there are many more...

While I'm not a seasoned pro I've had Kioti for several years and can dig holes and get a buck of dirt.... many times it's just about full. Sometimes not, depending on the dirt I'm in. What I'm hoping to get a handle on is How much bigger. I will most likely buy used and try to find something...

So far thumbling around in the manual I haven't found its location. I'd mentioned to a fellow tractor driver that my backhoe wasn't digging very well. He said check the hydraulic system filter. In the manual under trouble shooting it mentioned the transmission oil filter. His tractor is a good...

I recently got a Kioti KB2376 operators manual from ebay. It's a 2004 edition. I has parts numbers and exploded views for many of the components. Near the end of the operating instructions for the B H, is says, boom and swing control levers and bucket and crowd levers can all move...

I noticed the bucket teeth look very dull and rounded. My back hoe model is K B 2376, when I called dealer in Texas he didn't have teeth for my back hoe. My teeth look like it would be very difficult to remove them. there is a hole iin the side of each tooth that looks like it has a pin in it...

I keep forgetting to ask about this. Sitting that the B.H. controls the right stabilizer will not raise the tractor enough to level it in some situations. It's has always been the weak side. Currently there are two low level leaks in the system. One probably originating in the stack valve area...

Is it possible to get something with suspension that doesn't cost an arm and a leg. I'm not sure if one of those would leave enough room to sit in that tiny area. But I guess I can dream....... Ron

I don't see a private messaging area here, so at the risk of arousing the vigilanties I'll be direct. I want to install an on off switch to replace the ignition switch. I need some help with the circuitry. I'm assuming there are other functions that use the ignition switch. There must be some of...

I have misplaced my Owner's Manual. It's been about a month so I thought I'd ask if anyone has an extra one. I'd buy it for sure. I've seen a manual for an LK30. Does anyone know if that one would be useful as a substitute? I'm guessing that's an older model than mine. Is there a Kioti parts...

Kioti Lk354 Workshop Service Repair Manual – Best Manuals At the above website they are selling service manuals [.pdf file] for download. Has anyone tried their manuals? How are the graphics? Just wondering if they are legit. I have misplaced my Owner's Manual and ran across this site while...

What color should that larger air filter be? AND, if it needs cleaning, would alcohol be a good rinsing agent? Thank you mucho, Ron

Hello, does anyone know of a dealer who can provide a freeze plug style block heater that fits the threads on my LK 3054? Ron

Are these intended to be left on all night? if so are there other options to heat the colling system and block quicker w/o damage to oil or cooling system? Thanks for your time. Ron

Hello everyone, Been trying to read up on heaters for cold morning tractor starts. I learned some things but no one mentioned what I want to know. I'd like something that can do the job in less than an hour if possible. We live off grid so that probable amount of wattage is a concern. Depending...

Hello, I'm having trouble with my blue wire connection in the vacinity of the shutoff switch. I don't see how it's supposed to connect in this area. It's almost like something that should be there fell off It's been a while since I replaced this part and I can't remember how it is accomplished...