Recent content by rongrzywacz

There is some free play in clutch, hard to tell if it’s worn linkag. How do I know if it has a hydraulic reverser? It seemed to run ok on flat ground but was slipping going up hill

I purchased property that had an old Deere 310A backhoe on it. (Late 80’s, early 90’s) It hasn’t run in about 12 yrs . After some work on injector pump I managed to get it started.. everything seemed to work, will need a lot of TLC. The engine sounded fine… only major issue I saw was the clutch...

That’s a good idea, but I’m saving my $$’s to pit up a big pole barn now ..

I have room in the garage for the tractor… not the implements. No time to build anything, tried tarp carport and it blew away in the first windstorm.. property is a valley/ wind tunnel..

Lost my barn in a wind storm this winter.. will probably be a year before I can get a new barn built.. I have several pieces of equipment, mowers, discs, plows, scrapers, auger… that I will be storing outside. Should I cover them with a tarp or not.. with a tarp dampness still gets in, without...

Anyone know where i can find plow share for an old Fergunson 2 bottom plow they have AO12AC 121 stamped on the back -- 3 hole Thanks for any help

I have a broken share on my old 2 bottom fergunson plows. the 3 bolt share is stamped A0 12AC 121.. I've checked all of the shops in PA and no one knows where i can get one. Any help would be greatly appreciated. Ron G.

Just bought a used king kutter rotary mower. There is a plastic cover on the PTO Shaft with a couple of small chains on it. Are the chains supposed to be connected when running it? Or does the cover spin with the shaft. I didn't see any reference to these chains on the manual that i...

I just purchased a used king kutter 6' bush hog (Blue). When i looked at the bolts that hold the blades on it looks like someone (the dealer?) put a small tack weld on the nut (to the bolt). Is this normal?? What do I do when i need to replace them?? I don't believe that the owner I got the...

Neighbors tractor/loader has a slice in one of his rear ag tires. it is not too deep, can't see any of the cords, but does go through one of the cross lugs. It is not leaking and the tires are not loaded. Is there anything i can use to seal the slice to keep sharp rocks/dirt out. I probably...

Has anyone ever worked on the gear box for a woods m5 dixie cutter bush hog. Someone gave me a used mower. The deck is in decent shape, but after i added gear oil to the gear box most of it leaked out. When i opened the gear box one of the gears is worn. Any ideas on how hard it is to change...