rumwrks's latest activity
-
RThat 49 price is before China shipping by slow boat that will put it over the 99 saw shipped cost from NJ warehouse. Just so aware of that.
-
RIf you can get feedback from different owners, their first hand experiences, that would help. Also, go rent a couple different machines...
-
RCenter of the wheel is just a SWAG. It cannot be more than that. It is almost assuredly less as the axle takes up space, too...
-
Rrumwrks reacted to pmsmechanic's post in the thread Anyone have a MechMaxx 3-pt stump grinder? with
Good Post.
Time to tell my 11 stump story. I bought a Woodland Mills WG 24 PRO. I thought about a MechMaxx but was concerned about the whole tariff... -
Rrumwrks reacted to JJT's post in the thread Anyone have a MechMaxx 3-pt stump grinder? with Good Post.
Slow and steady with small bites. I agree the clutch is too tight, it needs to slip before taking out the tractor. Had a neighbor that...
-
RFound actual weights of my M7040SU. I would bet that M9540 weighs a lot more than the book says. Operator's manual tractor weight...
-
RI've been thinning/chipping my stands of pines for over 35 years now. Currently I have a Wallenstein BX62S mounted on my Kubota M6040...
-
Rrumwrks reacted to grsthegreat's post in the thread Considering a 3 pt. wood chipper with Good Post.
On my latest project i kept the chipper in the shed, hired a guy with an industrial root grinder and another guy with a 100 hp forestry...
-
Rrumwrks reacted to Dftodd's post in the thread Trailer warning, this could happen to you with Good Post.
I have a Ranger trailer light tester box at work that handles everything but the commercial trailer. It's set up for the 7 pin rv...
-
Rrumwrks replied to the thread Considering a 3 pt. wood chipper.I think you're pushing the edge of capabilities power wise IMHO. I have the woodland mills 8" chipper and run it on a 55HP turbo with a...
-
RWeight wise yes power wise you might be border line for 6-8” material.
-
RWhat size tractor will you be using on the chipper? Like GS stated a 6” log of any length especially with branches is a handful to move...
-
Rrumwrks reacted to airbiscuit's post in the thread I just bought an Echo 2511t clone for $99. What was I thinking? with Good Post.
Reading through the threads, it looks like these are the 2511t clone owners
-
Rrumwrks reacted to xyz123's post in the thread I just bought an Echo 2511t clone for $99. What was I thinking? with Good Post.
I've never tried to take plug out of the farmertec one. Runs great, run the dang saw. I replaced the one in vmodest and saw no...
-
Rrumwrks reacted to 2manyrocks's post in the thread I just bought an Echo 2511t clone for $99. What was I thinking? with Good Post.
The Joncutter G2511 I bought from Az had the brake tripped when it came out of the box. No amount of leverage was going to reset the...