Recent content by SaskyBoy89

I emailed them and theyvsaid they didnt have it.

Here some more pictures if anyone wants yo see whats the gear transmission looks like. The reverse gear deffently has some wear

Yea its pretty cold here that last little and was working in my un heated garage. I did lut the covers back on and give it a decent cleaning around the seem that i spilt it at. Havnt found anything yet as for a new part. I can weld pretty decently with stick and mig juat starting with tig. I do...

I didnt want tk mess with bellhousing or any of the stuff close to m engine. I took apart the tractor here right in front of the transmission gearing and all the shafts that need to go either way were just in the bearings with no snap rings. Was able to get my broken shift fork out. Now waiting...

I got this far taking stuff off. Can i break the tractor right here to access the transmisson? Does the clutch plate come with the back half? I have a engine hoist i can borrow so will be using that to help remove this piece. Thanks

Well as expected the shift fork is broken, i was able to us a inspection camera to see and i can to the linkage which I noticed I cannot on the other side 1/3 shift fork. is splitting these tractors apart to get in there to replace this piece pretty self explanatory? any specials tools needed...

Looks like that f14 manual does show the set up i am hopiny the shift fork didnt break off its either jammed or that happened as when it shifts the second which is on same side as reverse it stays in reverse but when going to 1 or 3 on differe t side it stalls out

Yea just trying to figure out what the pins under the coger the levers acuatlly move. I opened up the top fo the trans cover and couldnt see much. Going to drain all the fluid hoping i can see a gear and pry on it or somtbing. I will look for a transmission identification Thanks

Is there acutally a f15d maunal on that site or just the 276d? Thats all i could find Thanks

Ok thanks posting there

Hi, I have a f16d tractor was using it today and switched between reverse and 2nd and it kept going backwards. If it try to put it in 1 or 3 it will stall out if i out in the 2nd spot stays reverse. Is there a linkage between the pin the shift moves and a gear somwhere? Any help sith a...

Hello, new here I Have a Yanmar F16D tractor that i have had for a few years now that has worked pretty good for me. today I was driving it and went to change from reverse to 2nd gear and it jus stayed in Reverse. I can change the gear lever to any of the r 1 2 3 and it still goes in reverse...