Recent content by Schmitty1

OK, confirmed some measurements: OD of bushing is 1.500 +/-0.003" OD of a new pin 7 for this link is 1.185" ID of rod eye is 1.497" I fumbled around with this set to get the bushing pushed out about 1/2" to measure it and the rod eye: Powerbuilt Ball and U Joint Service Set, 23 Piece. The...

7J275-64510, NLA from Messicks but Coleman has 2-5 day lead time. Note that it says it is for an LA844, so no guarantee it will fit properly. Yes, it should be fancy, alas it will likely just be a soft sleeve. I do plan to press one of mine out to confirm ID and OD, in case some handy person...

I've got the same issue. I replaced the 6 lowest pins on the FEL with no improvement. I bought the 6 link pieces and swapped them in a few weeks ago with no improvement, either. With everything apart it is easier to see that there is significant slop around the bucket curl rod eye, which has a...