Hi, I'm considering to buy a welder. My first choice would be a stick welder like the Miller Thunderbolt 225/150 AC DC. My question is how many Amp must the electrical outlet (and the breaker) be? Thanks.
In my L3830DT the fuse box is located on the right side of the clutch pedal. It is so close to it that often, when I drive backward and tend to rotate my foot toward the left, I hit it with my shoe. A couple of times I've bent it and had to straiten it. The box itself is attached by a very weak...
Hi, I have a L3830 and I have difficulties in engaging the front wheel drive. At time they engage very easily and at times it is a nightmare. Any suggestions?. Thanks.
Hello, in the three point hitch there are two telescopic stabilizers, left and right. They have a few holes and one slot to insert the pin to limit the horizontal sway of the implement. My question is when to use the holes (min sway) and the slot (max sway). Thanks.
I posted this in another section but I like to share this with Kubota owners (hope it is allowed.
Finally I mounted the new tire chains. It was very easy after watching the You Tube video for Trygg chains, although mine are only 5 mm, 33 pounds, and made by a different manufacturer. I had to...
Finally I mounted the new tire chains. It was very easy after watching the You Tube video for Trygg chains, although mine are only 5 mm, 33 pounds, and made by a different manufacturer. I had to cut 4 cross links but everything went smooth and easy. Probably 1/2 hour each, cutting included and...
Hi, I never welded but I'm thinking to give it a try. The point is that I know nothing more that what I could find in the pages of the various manufacturer of welding machines. I will use the welder on tractor related equipment and therefore on 1/2 inch of iron or more.
I was initially...
Hi, I have a Kubota L3830 with loaded real industrial tires. I need to inflate the rear tires but I have a few questions. The manual states that the tires should be inflated at 20PSI but does not specify if loaded or not. Which is the correct pressure in your experience? Also, for loaded tires...
Hi, i have a question that I'm sure has been debated but i cannot find on TBN.
Which type of sealant use on the thread of the hydraulic connections?
Thanks
Hello everybody. I have a Kubota L3830 with R4 tire with no traction in snow or mud.
I've been considering snow chains but there is no clearance between the real wheel and the tire for tire chains. So finally I'm ready to have the tires moved by the dealer but I've not decided which tire...
Hi, I have a small garden that slowly Im expanding. In previous years i grew vegetables and grains which went to the chickens. This year i would like to grow more grains, in particular wheat and buckwheat for family use. I need a thresher. Anybody know of a small reliable one that I could buy? I...
Hello, I have a L3830. Today, going uphill in mushy snow in 4 WD (no tire chains yet!) one front wheel started to spin while the other was still. I thought that the front wheel in 4 WD where linked together. Is the spinning in the front wheel normal? Thanks.
I posted this in another forum, by=ut this might be more appropriate.
Hello, finally I decided (almost): my Kubota L3830 will be picked up by the dealer to change position of the rear wheels in order to get clearance for tires chains. And here is my point. I have R4 ind. tires with a total rear...
Hello, finally I decided (almost): my Kubota L3830 will be picked up by the dealer to change position of the rear wheels in order to get clearance for tires chains. And here is my point. I have R4 ind. tires with a total rear width practically identical to that of the front end loader, about 72...
I'm investigating possible solutions for an alternative for tire chains for my L3830 with R4.
I found the MaxiGrip which seems to be a nice solution. Before committing I would like to see if anybody as experience with these. In particular are they good only for ice or also for general...