Well, I reviewed the diagram you provided and sure enough I had the hose from the rear vane pump in the incorrect location. I re routed the hoses as per the diagram and the machine is back to operating as it should. I guess in my rush of trying to put it back together before the holidays I must...
Here are the pictures of the 3 hoses that were replaced going to the right side drive motor. The other hose is a large hose that runs through the back side of the machine from one side to the other and that can't have any other placement.
Ive looked over the hoses and they appear to be correct. When I had the new replacements made they were all specific sizes so can't really have them mixed up as far as location goes. The pump will create pressure as the motor cranks to where it walks the machine backwards on the right side as...
Thanks for the reply. Ive looked over the hoses and they appear to be correct. When I had the new replacements made they were all specific sizes so can't really have them mixed up as far as location goes. The pump will create pressure as the motor cranks to where it walks the machine backwards...
Thanks for the reply. The new hoses are filled with fluid because It is turning the right side wheels in reverse. The pump will create pressure as the motor cranks to where it walks the machine backwards on one side as its trying to start. Even if I hold both lever forward while trying to start...
I have a 1989 bobcat 743 that I use on my farm down in south Florida. I was working the machine the other day when I blew a hose that goes to the right side drive motor. The machine was going backwards when it blew, I was grading some dirt. I replaced that blown hose along with the two other...
I have a 1989 bobcat 743 that I use on my farm down in south Florida. I was working the machine the other day when I blew a hose that goes to the right side drive motor. The machine was going backwards when it blew, I was grading some dirt. I replaced that blown hose along with the two other...