Recent content by sixgun

I'm using the Kubota 60" blade on the front of my B2710 and I'm considering the SAM PW22 wings that Northern Tool (and others) sell. They are supposed to add about 10" per side and angle forward about 22 degrees. The blade I'm using now sure beats the bucket method, which evolved into a...

I just turned 260 hours in my almost 5 year old B2710. Sad, I know. I was going to wait until fall to do the hydro fluid so that I'd bet set for winter but since I had all the stuff... I replaced the UDT with more UDT at the 50 hour service and since the whine of the transmission sounded just...

This year is the first that I have used the front ihydraulic blade to move snow and it has been, without a doubt, easier than the back blade and loader combo. I have a ton of room to store snow so the need for a loader for making space doesn't exist. We just had an 18" storm and the 60" blade...

Folks, I tried posting this in the "want ads" but there doesn't seem to be anyone home down there. Anybody out there have skid shoes to fit a B2765 Kubota blade? The inside diameter of the sleeves on the blade are smaller than those used on the more popular brands. New price is $42 EACH, not...

I've got all of the other pieces but, alas, Tiny Tim has no shoes.:(

I just picked up this 60" blade, subframe, etc...for a finish mower that I did not have a use for. Been reading about it for some time and thought it might make snow removal a bit more fun. I'll be attaching this to a B2710 with filled turf tires and was thinking of adding even a bit more...

Looking to see if one might work on my Kubota B-2710. Anyone have one and could tell me about how many inches I can expect to add to the height (above the ROPS) of my unit? Clearance could be an issue. Also, are there other brands that folks have had good luck with?

I'm a new pto pump owner and hope to use it to power the woodsplitter I own, and I'd like some advice from those who have worked with these things. Due to clearance issues I bought a shaft extender for the rear pto. The width of the pump body is about 5 inches or so but the shaft only...