Here is a photo of a new pin. The red line shows where the pin side (on the left) broke off. The base (right side) remains stuck in the tractor.
Once I removed the two bolts it should just easily slide out. If feels very loose and rotates each direction. It just won''t slide out. If that...
This is a John Deere 4700.
There is no easy way of getting behind the pin to force it out. The round shaft opposite end of the pin side slides into a round receiving socket in the trans axle housing, and there are simply 2 bolts that fasten it.
It snapped because I was grading in reverse with...
One of my attaching pins for my 3 point lower draft link arm snapped. I've had this happen before and it was an easy replacement. This time however, I took out the two bolts and the pin won't slide out. It feels really loose and rotates easily but it will not slide outwards at all. Ive tried...
I'm still trying to figure out which mower would be best for my property & tractor?
I have a JD 4700 which has about 40 HP at the PTO, maybe a bit less HP now as the tractor is 19 years old. For years I used by rotary mower to keep the property mowed which did the job but looked sloppy. My...
I'm considering the Betstco Heavy Duty Trail Cutter/Flail Mower for my JD 49hp tractor (41pto) and was hoping to get feedback either positive or negative from others who have purchased this brand before .
How is the performance, quality, and reliability?
Any problem with customer service or...
I have a J.D. 4700 with a 460 loader. Been doing a little shopping around and have seen many types of fork lift attachments, both 3-point and loader types.
Anyone care to offer suggestions for a decent brand & model for my tractor that is well made and competitive pricing?
Thank you