Smokeydog's latest activity

I first got flustered with used M5030 loader that was probably made in Canada. Not SAE so bought a metric assortment. They didn’t work...

Use to enjoy drinks with my BIL, we called them Jim-Atomics. The essential ingredient, good limes, was hard to keep around. Found...

A section of our deck is uncovered and exposed. Rain, woods everything likes to turn green and rot. Been experimenting, retired...

I wouldn’t suggest using it on a house deck for a multitude of reasons. Biggest would be smell, and tracking it into your house.

If you have pallet forks, you might try using them to fluff the pile. There is less resistance as the compost falls between the forks...

When you overload your SCUT/CUT you are stressing components not designed to handle the loads. Overloading occurs when you doing things...

I’ve got a single spindle 286 I bought used that needs the same. Bad seal on a little used mower. Previous one lasted 25 years without a...

With gauge wheel spindles spacers easy enough to lower the front or raise back about an inch and evaluate the cut. Do the easy stuff first.

Not sure if the OP spindles are made like my Woods 7200RD. If my memory is correct and is always questionable. Features double taper...

Single bolt blade mounting takes specialized hardware and techniques. Like to two bolts blades on my RD7200. Gator blades also work...

Front of the mower deck should be 1/2” lower than the back. Back wheels tread usually wear faster. On my woods rd7200 the taper lock...

Worth mentioning is many small gas engines are rated for no more than 15 degree slopes, some 20, before oil lubrication is an issue...

Just changed the original coolant in 2016 B26. 850 hours. Bright green and clear in catch bucket. Few small solids but maybe from...

https://www.govdeals.com/en/asset/127/3082

Wife didn’t like goat till she tried it. Then let’s eat another one. Low and slow they BBQ well. Much prefer goat over lamb or venison...