OK..its a 1966 188 DIESEL CASE 530CK ...I believe it sucked in alot of water through a auxilary tank that previous owner put on...I was trying to get some wood moved before i replaced the fuel tank and it just died...(like I pulled the fuel cutoff but with white smoke).. So, I drained tank...
So..I've searched all over the web and can't seem to find info on this..
Does anyone know if the fuel tank can be pulled with the loader on?
How do you take the model 32 loader off? (my spacer over fuel tank between loader arms seems to be stuck) Anything I am missing? Take nut off, support...
Just wanted to let some folks like myself (not very experienced with tractor hydraulic oil) know that it is NOT all created equal reguardless of label specs!!
1st little history on my 1966 Diesel case 530 Torque converter Constuction King- I bought this used for 2000.00 in working (leaked...
Hi folks- My issue is I've drained all fluids and replaced with high dollar case fluids..My question is I've refilled the torque tube and hydraulic reservoir through the breather next to the shuttle shift. I now have NO reading whatsoever on the dip stick?? I'm lost... Everything I've read told...
Hi folks- Sorry if this has been covered but I cant find a thread on it with a definative answer on here. I drained my tranny/torque tube (2-plugs and 2-small 3/16 allen screws). Do I need to just fill at dip stick? any special procedure?
Hi- does anyone know where to find this. I'm having no luck on ebay. The cap has G1353 stamped on it. I need the retainer for the filter as well. When I pulled this cover off to replace the filter I found it had none..ughh. I hate that. Its a cheap filter. Anyways the cover was broke and all the...
Hi folks-
I'm currently in search of backhoe bucket pins for a model 32 backhoe..When I bought this it had makeshift pins still in it. I may need a bucket too. Does anyone have any idea of the standard sizes on these pins?
Hi folks- I've searched but get confused on this subject. I obviously need to drain my diff fluid/trans.lol. The boot over shifter was off. Hopefully thats were the moisture is coming from.
My question is..Manual calls for 80-90 gear oil.. Alot of ppl run same type of hydro fluid in both.. I...
Hola-I'm looking for a temp sending unit for my tractor. I'm not in restore mode yet until I get the time/space. Can I simply buy any aftermarket sending unit? What are my options? I'd just like to know i'm not overheating this beast.
Also, I'm missing pins/bushings for the hoe...I'm searching...
Hi- I'm Rob from New Jersey. Just stumbled on a beat up 1966 530 for 2k. Everything moves and operates...leaks fluid from...uhhh...everywhere. The model says D530 TC. I'm still trying to figure out what that is. Bucket has all mismatched pins/bushings. Appears to be a very strong running engine...