spruce Deere's latest activity
-
spruce Deere reacted to tacticalturnip's post in the thread Joined the Kubota club.... with
Good Post.
I had to look the model up, and wow, that is narrow! Very nice purchase, I hope you post pictures when it arrives, and when you're... -
Doubt that. There'll be engineering costs to design a vent system that they already had decades ago, setup costs to design and fabricate...
-
More gas gets spilled and vented into the air with these stupid EPA cans than the old ones.
-
Saw this, great news. Reducing gas can flow to a pathetic dribble helped nobody. So wait. They are only directing the manufacturers...
-
spruce Deere replied to the thread Joined the Kubota club.....Your right No.2, it does only come with the gear tranny. I had t dig out the brochure and look!!
-
spruce Deere reacted to bigtiller's post in the thread King Kutter 5 Foot Tiller Clogging Issue with Good Post.
That actually happens quite often. The problem is, the grass is to long and green. Next time, let the cut grass decompose for a few...
-
Pulled the trigger on a kubota B2401 narrow tractor last week. The B2401 narrow REALLY shined in the tree farm in tight rows, turning...
-
spruce Deere reacted to GS650GL's post in the thread Solving the “Floppy Bucket” by adding a flow restriction with Good Post.
All brands of tractors can and do have floppy bucket syndrome, not because of a defect but because of the laws of physics. During the...
-
spruce Deere reacted to ptsg's post in the thread Solving the “Floppy Bucket” by adding a flow restriction with Good Post.
There is always the possibility of adding a regenerative valve to the circuit...
-
spruce Deere replied to the thread 3 point hitch will not lower..I discovered if the hydraulic lever that is not detented, or the lever that does not return to neutral after pressure peaks, is pushed...
-
I can hook up the brush cutter in 1 to 2 minutes, just like any other attachment. All it takes is to back up to the implement till the...
-
I finally got a rock bucket. I went with an Ironcraft. It seems well made and was about $1,000 cheaper than the Spartan. I have only...
-
spruce Deere replied to the thread Solving the “Floppy Bucket” by adding a flow restriction.The floppy bucket syndrome is not much an issue with my xr3140, but the deere 790 is very prone to it. Over the time of 18 years of...
-
spruce Deere reacted to GS650GL's post in the thread Solving the “Floppy Bucket” by adding a flow restriction with Good Post.
That is correct, you only need one on the hose from the valve, and it does help floppy bucket syndrome. The one recommended above is...
-
spruce Deere replied to the thread Tractors and wood! Show your pics.That ol' homelight XL brings back memories of dad and I doing firewood...