funny you mention this, I grabbed an off brand belt bcause i was near it. it lasted about 3 minutes lol. It kept jumping off the lower pulley under that arm. but the arm does seem to have wear on it.
I cant find anything else wrong, the pulleys all seem decent and they spin freely but when the...
I have been looking online for a new belt. I see some spec a belt at 144.8 inches others a belt at 146.25. Why the difference and how do i tell what i need.
I just put a new one on a month ago that got torn up, my kid got into some branches. I checked the pullies etc and they all seem ok. the...
I’d agree but my bushings are tight, took them to the dealer to verify. I’d like to know what the standard amount of play/spacing between the gear and the sector is to see if somehow the mount is damaged on mine. I gave it a good looking over and couldn’t find anything obvious on it.
I was the same. The small gear on the steering shaft was ok, the sector wasn’t. The old sector I had a friend weld teeth in a year or so ago. I’m not sure if the amount of play between the steering shaft gear and sector is standard ( though it should be as the bushing etc are all good). I’m...
I’ve got a John Deere x300. Replaced the steering sector. Bushings seem snug on the new install but there seems to be more slop in the gear where it engages the sector than I expected.
with the tractor parked how much should the steering shaft feet be able to turn back and forth before coming...