I removed the plug in the photo attached and installed the “regular “ plug. The loader and tractor now work as advertised. I have the pressure gauge on order and will reset the regulator. I greatly appreciate the help. I’ll read up on hydraulic systems to avoid these errors of ignorance going...
Good evening. I parked the tractor as suggested. I was baling hay all weekend so I couldn’t reply earlier. I’m using my other tractors, but the Branson is my hay mover. The tractor has six lines. I’m attaching 2 photos. My finger is pointing to the only difference between the old valve and the...
I appreciate the help. I also apologize for my lack of knowledge with hydraulics. I know how painful it is to watch/listen to people try to do things when they obviously are in over their head.
The thing I adjusted is on the FEL valve itself. A very tall nut, a set nut and a threaded stud with...
I appreciate all the feedback. I adjusted the pressure. I gave it 2 turns to lower the pressure and I could hear the load come off the engine. The 3 point hitch is working correctly again. I assumed the factory replacement would be set to specs. My problem is I have limited knowledge of...
I have a Branson 6530 with the BL30 loader. The hydraulic valves controlling the loader function leaked for years so I bit the bullet and ordered a Branson valve. $1600, ouch. I replaced the valve and the loader functions normally with no leaks. Now it gets weird.
with the tractor running it...