Recent content by taos

I warm up engine aprox 5 minutes ,(at idle)and then mouve it out of garage and run it at fast idle aprox 1 minute , then drive around back to start working and i notice even after running for aprox 15minutes the temp gauge stays cold,I was wondering if anybody else had the same problem (gauge...

I' m looking for the weight of kubota pallet forks and frame model number k9048 and b1659 they fit a L504 loader b series tractor , i know the weight capacity is 1000lbs, but how much do they weight

I have a rck60 -29b deck and the shield on the deck can only be lifted 3 inches or 10 degrees or less is this normal ? my old rck54 the shield on my bx25 was capable of lifting over 90 degrees the rck60-29b decks shield hits a bolt on cutting deck and this bolt inteferes with the shield from...

I was cutting the grass and was almost done when i noticed slight vibration ,i thought one of the blades was loose so I stopped the tractor and checked the blades all was good i then lifted the hood and checked the oil it was full and checked the antifreeze it was full,looked around engine bay...

I was wondering what the tire pressure was for the front and rear of a b2920 (turf tires ) if different.(i'm waiting for manual for tractor) dealer lost it. thanks

Does anyone own a b2920 with r3 tires(turf)and can you check to see what size tires front and rear you have that were on the tractor when new from kubota,and the manufacture of the tires,i think i got the wrong size the tractor was delivered with(rear 12.5x15 and 8.5 x12 I think they should be...

Hi i'm looking to buy a new b series tractor ,I tried a new demo unit b2920 last night and realy liked it ,I have a bx25 now and wanted something with more ground clearance then the bx 25,the tractor will be used mostly for grass cutting ,1 acre,and I also have another 5 acres of rough rocky...

Hi I was thinking of trading up to a b series and was wondering what horsepower was a good choice ,I have a bx 25 now,also does a b series cut grass as good as a bx series,(does the b series damage the turf) with turf tires? I was looking at higher ground clearance and more hydraulic flow and...

can anyone tell me what year the tractor is by the serial #

I was wondering what kind of hours a bx tractor owner could expect with proper maintenance?

Hi I was wondering if anybody knew what was the best implement to use to bury a water hose aprox 8 to 10 inches, on a sod property, (a single bottom plow ?) a furrow? that would cause the least amount damage to the sod, I have a kubota bx 25 and the soil is 6" of topsoil+under that just sand...