Recent content by TennesseeTN65

Got some time and finally got the sending unit redone, i was seriously considering just getting a new one for $100, but ive put these back together a lot on other vehicles and i found all the important parts in the bottom of the tank, so i decided to give repairing it a shot to save a few $$. Im...

I just had a friend i texted the pics to point out that the line on the sending unit is a vent or return line, the tube doesnt attach to where the line goes so the whole unit is just for the fuel gauge. I guess the line about 2 inches from the bottom of the tank is the pick-up. Theres a little...

Yeah i keep the hammer to get the front end loader pins to lift up, they are supposed to be liftable by hand but they need a smack to get to release fully. It sits there and never moves, so i just leave it lol. I have a few options for a car wash, my local one has a townhouse right behind it...

I know whats going on now, after i had to clean the lift pump screen yet again, i decided to drain the tank. I put a10 gal washtub under the drain plug and let it rip. The fuel was a nasty yellowish color but there really wasnt much physical crud like i found in the screen. I had to empty the...

Ok i think i know where its at now, theres a hex shaped "lug" i saw to the left of the bulkhead where the line fitting screws in. I ignored it bc i thought it was where another fitting bulkhead could have went but wasnt cut out. Ill try unscrewing it when i get around to working on it some more.

I got done bush hogging just a while ago, i found a bunch of the same cranberry looking crud inside the lift pump again before i started so i took the lines off and pulled the screen, sprayed it all out, put it back and fueled it up and tractor fired up and ran fine for a while. As i was coming...

I take both sides off each time i clean the screen and i spray them and the inside if the bolts out with cleaner before i put them back. if i left them on, i couldnt get the crud out of the bowl or whatever it is that holds the screen without it going out a line. Also one time when i was...

When I first had it die on me on the hill and it kept giving me problems cranking I was thinking something in the tank was clogged so i pulled the line off the fitting on the bottom of the tank, thinking it was a pick up and once i saw fuel flowing out, i put it back and moved on to the filter...

Hello im new here, been lurking for a bit and decided to join. I have the same tractor with similar issue. It was my dads tractor bought new in 2000 or 2001 and i inherited it, it sat from 2019 until earlier this year. I took it and went to bush hog and it made it up one hill and it died. I...