Recent content by thekkfan

$89 for monitor and two cams (one up front and one for the rear). Amazon.com: HD 72P Backup Camera and 7" Monitor Kit, 2 Cameras for School Bus/Trailer/RV/Truck/Pick up/Van Rear View Camera Single Power System IP68 Waterproof Night Vision Driving/Reversing Use: Car Electronics

I installed two waterproof switches I bought online. I had to make a new mount plate (black acrylic from Amazon) because I couldn't find anything to fit the existing holes that WERE waterproof. I have installed two light pods below (I don't have a pic of those, but will try to add tonight) that...

I run one of these nozzles with a 3gpm flowjet pump. Have a manifold that allows agitation back into the tank as needed. Covers around 16-18ft.... nozzle https://www.northerntool.com/shop/tools/product_200326933_200326933 manifold... Fimco Quick Release Manifold Kit 7771967

:welcome: to TBN and welcome to the pack!

I use this little coleman with my pole saw strapped to pallet forks. I have a wireless remote on/off from amazon to turn it on. If you look closely, you can see the box plugged into the outlet. cost me $11. It's went up a little in price, but works nonetheless...

Thought I'd update after adjusting my rear roller height and top link again, I was able to get a great cut first time through AND was able to pick up ground speed with my farmer's helper. Here's a few pics field mowing tall grass mixed with foxtail and lespedeza. Some of the areas were just over...

Mine ain't a 'bota but this one is 1/8" plate :) I've smacked it with a couple good ones at least 4" in diameter and held up fine.

No, its not lazy. I couldn't see my pallet fork tips when they are right off the ground and level. I can now. I can also swivel my rear one and keep an eye on haybine and baler without breaking my neck all day! Last week I used the rear one to watch my flail mower while trimming the side ditch...

I made this one from a pickle barrel. Dropped in (10-1/2) 80lb. bags. At an estimate of 86 lbs/bag cured + the barrel, stabilizer, and other pieces, I think its around 930lbs. I dropped in a couple pvc pipes for tool storage if needed, and didn't pour all the way to the top. I store chains in...

I'll add to the discussion that I have the std duty FH-EF175. Mainly wanted a backup for my 54" mower if it dies and to trim back pastures after grazing and couple fields that get bush hogged 3 times a year. I'll have to say initially I wasn't impressed with mowing quality with the Y knives. I...

60" twin lid from MTL. Best attachment purchase so far.

You mean THIS Remington saw? I used (3) 5" hose clamps from TS to pin it to my forks. I use a little suitcase genny I picked up off CL for $75 and a wireless remote on/off switch from Amazon for $11 to turn it on and off. I also have a gas pole saw I can use from work platform for greater reach...

This is from the titan site. I only say this because my BETSTCO had the same assembly and I had no trouble assembling the way I described. I wondered if that issue stressed the folds, especially if there was any side to side movement (ie. smacked side of a tree, etc).

60 gallon pickle barrel, 10-1/2 80lb bags of quikcrete (est total ~950lbs). The top and lowers are interconnected, of course. Room for a couple tools with lid off or log chain under the lid.

Contrary to what others here say, yes, you can-but only with the right rotary cutter. Will the output be as plentiful as a sickle type or disc/drum- no. In fact you'll have some waste due to what you run over with the tractor that will not get cut. Doesn't sound like much until you do the...