Recent content by Tman43

My parts illustration shows that the two halves of the rim are attached directly to each other. But on my tractor the halves on mounted on the both sides of the hub. The inner rim on one side and the outer rim on the other. Which is correct? I am mounting dual wheel adaptors and thought I would...

Gravely steering sulky, Gravely dump cart, and Gravely rotary plow for $500?

I started my Gravely up and moved it about three feet, when it shut off. Turns out I forgot to open the valve on the gas tank. I opened the valve and went to start it again. It turned over a couple of time and then nothing. After pushing the starter button a few times, I touched the starter...

I am trying to find out what year my Gravely was built. The serial number plate on left hand side of the advance casting appears to be blank. I took a piece of paper and a pencil and tried to etch the number onto the paper but no numbers were visible. I looked with a flashlight and could not see...

I finally got my Super Convertible started up. It came with the 30 inch brush cutter already mounted (I got the 48 inch dozer blade as well) So I decided to give it a whirl. I drove it up to brush I wanted to cut. I have lived on this property for 13 years and this was the brush at the edge of...

When I bought it I knew it wasn't running. The engine turned freely when I tried to start it with the electric start but it wouldn't fire up. I went thru and cleaned up the connections, both positive and ground and from the starter to the foot switch and back to the battery. The starter was much...

Hi guys. I am new to the forum. I just bought a Gravely Super Convertible. I am looking forward to picking your brains as I work my way thru the inevitable problems that i am sure will arise from an almost 40 year old machine. While I was checking out the Gravely, I noticed another machine that...