TMGT's latest activity

The outer layer on most hyd hoses is marginal at best on UV, some of the more expensive options are better, but I still see a lot of...

Scotty, I don't believe the relief in the priority valve is another relief not listed. Going from memory, the priority valve is made...

And don't forget the pto circuit after the steering but before the filter and hst charge circuit, each with their own pressure relief valve!

We're getting soaked here, the other day we got almost 4in in just over 1hr. I need it to dry out enough so I can mow before it gets...

It's worth doing, I had a hose blow on the loader a few years ago, worst possible time and made a huge mess. Hose didn't look that bad...

The charge lines pressure relief or the main loader/3pt relief? See item 3 on the diagram Scotty provided earlier.

Exactly, I switch between forks and bucket regularly. Also comes in very handy when loading/ unloading the ssqa implements on and off...

Looking at the workshop manual page that was posted, I would start by checking the charge pressure for the HST, looks the relief for it...

The nylon liners are for aluminum, the only machine I know of off the top of my head that uses a metal liner for aluminum is Fronius...

To the OP, does the filter fail immediately or only after an operation, like driving or turning or using the PTO?

It is, the only cartridge filter is the hst filters, the only other hyd filter is the suction screen. I couldn't remember the exact...

I own a PAS266 and have used other Echo pas units, all tighten down on the tool and have no play. On mine, once tight,the pin could be...

I don't think you understand, you don't have to get out of the seat operate the QA, only to switch from QA to remotes which you have to...

Something is wrong if the clamp isn't tightening down on the tools shaft, if you weren't able to get it tight and the pin was the only...

Factory relief on the loader circuit is about 1750psi, empty loader lift is maybe a couple hundred psi. The filter on the BX is part of...