Recent content by tncruzin

Can anyone advise me of a place to buy tractor tires at a reasonable price? I need a 9.5 X 22" tire and the local price I received was $225 for a single tire. Thanks in advance for your help.

Is there a rule of thumb on how often the basic fluids and filters should be changed on a tractor? If it makes a difference, I have an Iseki TL-1900 3 cylinder diesel with a 3AF1 Isuzu.

I need your help guys. I have a couple of questions. First, on an Iseki 1900-TL there are two filters on the right side of the engine. The engine is a 3AF1 Isuzu. One is the oil filter and I'm able to get information off of the old filter for a replacement. But what is the second screw on...

Are there any repairs available for a tire with a cut and the tube slightly bulging through the hole? I know with car tires they can put a boot on the inside sometimes.

I'm still looking for glowplugs for an Iseki TL-1900. I found them but I refuse to pay $68 each plus shipping. Can anyone help me out?

I contacted Iseki in Japan about a copy of specifications for this tractor. All they had was written in Japanese but they were kind enough to translate and add some notes in English. I've attached the document they sent. Hopefully this may be of help to those of you with this tractor.

iseki-ML-611914-ML- Brand specific. Moved to the Iseki forum.

I've had no luck finding a ROP for my Iseki. I'd like to hear thoughts and suggestions on a home made ROP. I know, I know...I've heard the horror stories about home made ROP's failing. But if the manufacturer can put a ROP on a tractor I'm convinced the user can build one that's just as strong...

I have an Iseki TL-1900. There is a lever below the throttle lever that has something to do with the hydraulic lift. There are 3 settings on the lever. Can someone tell me what it's for and what it does?

What\'s the lever for? My TL-1900 has a lever below the throttle control that has something to do with the hydraulic lift. Can someone tell me what it does?

Is anyone aware of a source for roll bars for tractors?

http://www1.sphere.ne.jp/delmundo/farm/iseki I'll share some of the information I've found. I hope this helps someone.

I've had very little luck finding specifications on the TL-1900. Can anyone tell me about: Horse power? I've found postings showing a range from 19 to 25HP. Weight? Ranges found are from 1600 to almost 2300 lbs. Manuals? I've been told the TS-1910, Bolen G-212 & 192 are close to the same...

Has anyone ever heard of placing a spacer on the tractor before mounting the wheels to create a little wider foot print? I wonered if this might be a cure to my problem of the lift-arm braces rubbing against the tires.

I have a problem that I hope some of you have solved. There is a brace that comes off of the differential case on eac side and goes back to the lift arm. These braces are so close that they rub my tires when there is no equipment attached. Has anyone else experienced this problem?