Recent content by tnhomestead

Nice road!

Hope so, since my horsepower keeps shrinking!

Got a sweet deal on a 53 jubilee. Got tractor, box blade, lift pole, weird looking cultivater and a cat 0 plow for 1600. Tractor works great, needs some minor bs is all. New lights, good clean etc is all it needs and some wiring to clean up. Can't read the serial number, but is on the block at...

Anyone ever pull a small single bottom plow or subsoiler with a beaver? If so how did it work? WAnt to plow a garden, soil is rocky and hard, tried a rototiller, need toget the soil loosened upfirst! Thnx Greg

Ok all I know about hydraulics is nothing! so here goes some questions. 1. I am adding hydraulic ports to a satoh. Want to add a pair of ports at rear fender(for log splitter and maybe backhoe,etc), and will tie into a soon to be built FEL up front. 2. Can I run 2 lines(pressure and return) to...

Running around the country collecting steel for projects, have some FEL questions. 1. Bucket Steel? I have seen plans from 18 gauge reinforced with 1/4 steel, to 1/8th and 1/4 steel for the bucket, any ideas? Willbe on a SCUT, about 1500 pounds with driver, lots of gravel in creek here. 2...

Size question -- have some plans for a FEL for a garden tractor, will 2 inch square tubing 1/4 in thick be strong enough for a small trator? Plans call for 2 in square 3/16 thick, with the upright made from 2.5 square 3/16th will upgrade that to 1/4 thick as well. Running a beaver satoh 15 HP...

Got a few projects I want to do -- any ideas where in the southeast or Kansas city area I can get good prices? Drive a semi, so any place I can fit in and grab some is cool with me! I live in midwest Tn, so any thing in that area would really be cool! Thnx!!!

Have a lil beaver satoh, has these stupid turf tread tires -- and they are useless!!! As usual have a lakamoney issue, so am I better off with chains or shelling out for AG tires? Use it for cutting the yard, and some woods work. thnx

oes anyone know what alternator is in a beaver 370? I need to get a replacement plug(4 prong) and cant read the plate on the alternator! Thnx for any help! greg

Found where I can get the gear box, cant bend pipe tho, has anyone made tone and can I do it with a straight pipe or square tubing? I just cant see why a hand held digger is 200 and one for the tractor is 400! Thnx in advance for any help! Greg

On the Satoh Beaver is the 3 point hitch power up only and gravity down or power up and down? Mine floats down with gravity or a helping hand but not with the lever. thnx greg

My steering shaft snapped in 2, got welded, managed once to line it up and turn it in, removed it to put the cover back and now cant get it back inplace == any help? Thnx in advance, got me so ticked off i cant think! LOL greg

Looking at the ready welder II, claims to do up 3/4 in, wire feed, will handle stainless and aluminum, runs on batteries(or A 24 VOLT SOURCE) I live off grid, so if it works should do what I need. Has anyone ever used one? What did you think? ythnx@!