Too many Kubotas's latest activity
-
TToo many Kubotas replied to the thread Rear Finish Mower How to narrow a three-point attachment arms.Went back and looked at the first photo again. Is it just me or could those flimsy brackets be bolted on farther back? It does look...
-
TToo many Kubotas reacted to SouthernSky's post in the thread Rear Finish Mower How to narrow a three-point attachment arms with
Good Post.
Well, I made some progress. Bought a binder at Harbor Freight and was able to pull it together by placing the hooks on the opposing... -
TToo many Kubotas reacted to paulsharvey's post in the thread What did you buy this week? with Good Post.
I ran into Harbor Freight today at work, cause I forgot a tape measure at the house... ended up with the 25 ft tape, and a 8 ton bottle...
-
TI have 51 acres. Most of it is pasture but I make hay on 12.5 acres. I have two tractors one 70hp and one 55hp. I have an elevated...
-
TNot in northern Nevada at least. Doesn't matter if you buy 5 gallons, 55 gallons, or 500 gallons - price is the same. Only discount...
-
TToo many Kubotas replied to the thread Rear Finish Mower How to narrow a three-point attachment arms.I have smacked the (too heavy) 6' brush hog sideways into immovable objects lots of time, using the L3800. But that Rhino 172 is built...
-
TToo many Kubotas reacted to scootr's post in the thread Rear Finish Mower How to narrow a three-point attachment arms with Good Post.
And that is why I own a Kubota. The arms slide in and out and side to side with adjustment pins. I can cant the mower off to the left or...
-
TToo many Kubotas replied to the thread Rear Finish Mower How to narrow a three-point attachment arms.Something as simple as a cable could be used to prevent them from spreading again. Wouldn't be my first choice, but it wouldn't require...
-
TToo many Kubotas reacted to ruffdog's post in the thread Rear Finish Mower How to narrow a three-point attachment arms with Good Post.
If that is the case, I would use my Hi-lift jack to squeeze the two ears together. It is very simple.
-
TToo many Kubotas reacted to workinonit's post in the thread Rear Finish Mower How to narrow a three-point attachment arms with Good Post.
You apparently think those are going to be really hard to bend. They are not. Select a way, get them off and bend them. The real...
-
TToo many Kubotas reacted to scootr's post in the thread Rear Finish Mower How to narrow a three-point attachment arms with Good Post.
Another question would be why is there no restriction preventing the tractor drag arms from spreading? My older tractors had a X of...
-
TToo many Kubotas reacted to duffer's post in the thread Rear Finish Mower How to narrow a three-point attachment arms with Good Post.
Concur with Runner. The right side mounting plate (orange & left in the picture) sure looks bent outward. Left side looks a little off...
-
TToo many Kubotas reacted to Runner's post in the thread Rear Finish Mower How to narrow a three-point attachment arms with Good Post.
I don't know if it's just the perspective in the picture, but it looks like the ears that the black arms are mounted to are bent...
-
TToo many Kubotas reacted to jyoutz's post in the thread Putting a 2.75" hardened steel pipe on rear blade for plowing in soft conditions? with Good Post.
It has been in the 40s at night for the past week and low 70s for highs. September and October are near perfect.
-
TToo many Kubotas reacted to tulenutn2o's post in the thread What did you buy this week? with Good Post.
I have gotten to the point where I am treated better by online sellers than locals too. It seems locals are indifferent to “small...