Recent content by tookielee

Might be forward and right, muscle memory thing, can't remember when I'm not doing it :)

I couldn't figure it out at first - I push all the way forward and left, like a sharp, stabbing motion, and you feel it lock in.

rode for a long time, last bike was a 2002 Goldwing... unfortunately, had to give it up, arthritis in my hands made it painful to ride more than 20 minutes or so at a stretch.

There's a guy famous for painting like that

MT-125: My fuel gauge has quit working, it's stuck on full. While the tractor is still in warranty, I'd rather not lose a bunch of time with it at the dealer for something so minor. Any suggestions of where to start to look?

SAE and Metric

Something seems amiss - Per the service manual for that tractor, coolant temp sensor is on side of block - OP should have gotten high gauge / alarms

I used mine with a little 15 HP Bolens - had to watch how fast it went down, but it worked ok = the 3 speed pto that could be stopped by pushing in the clutch helped - I don't like the electric ptos, there needs to be a way to feather them in gradually so it doesn't start so violently

Swapped out plastic for metal, and gained A little storage space in the process. Sorry picture is dark, sun is bright. Harbor Freight ammo can, original tool box sitting on top of it

Ordered Piranha bar on 8/14, got it on 9/09. Installed it, decided that I don't want to wrestle with the weight of the bar every time I don't need it, so I cut the slots longer, now I can loosen the bolts, slide it forward and flip it up and out of the way.

Received Piranha bar yesterday, installed it. Lengthened the slots so that I can install the clamp on forks without wrestling with the weight of the bar. By the way, if you buy clamp-on forks get them from a name brand manufacturer. I got mine from either Amazon or Ebay, don't remember. I have...

Ordered this yesterday

I ave never removed my bucket, but the one that came with mine appears to be set up for SSQA and pin on, loader model 1101 is like that... so if the one you get is the newest model, you may be able to get the SSQA mount, and be good to go. Here is a photo of my bucket

This will be a long post: I needed to rip some roots, and I thought it would be a good idea to get the MMM out of the way. Plus I wanted to see how hard it is to remove. So I removed it (actually easier than Cub Cadet riding mower) So off to ripping I go... after about 30 minutes, I reversed...