I have a Jinma 224 with 90 hrs and have experienced the following:
First off I like the tractor over all with the exception of the following quirks
1. Leaking hoses and valve on the ZL20 loader and boy are those metric fittings expensive once you can find them. It is almost chepaer to find a...
Is there any way to adjust the speed that the loader lowers.
The loader on my 224 works good with the exception of the lowering rate. It drops to quickly and I am concerned that something will break when the joystick is returned to neutral and the loader comes to a dead stop.
I have flushed the...
Both questions are for a Jinma 224
1. What should I set the idle RPM at.
2. To remove the cover plate for the creeper gear do I need to remove the creeper shift lever first or will it come off with the plate. If it needs to be removed first is this done by tapping out the roll pin through the...
I came across some info previously that described how to adjust the injector pump timing without removing the rad hose ect but cannot find it. If I remember correctly this could be done while the engine was running and all you needed to do was turn a screw or bolt to advance or ****** the...